{"product_id":"5x100mm-wheel-spacers-1-inch-5-lug-wheel-adapters-m12x1-25-56-1-mm-hub-bore-set-of-4","title":"5x100 Hubcentric Wheel Spacers 1 Inch for Subaru BRZ Impreza FR-S Exiga, M12x1.25 Studs, 56.1mm Hub Bore, Set of 4","description":"\u003ch2\u003e5x100 Hubcentric Wheel Spacers for Subaru BRZ, Impreza, FR-S, and Exiga\u003c\/h2\u003e\n\u003cp\u003eThese BDFHYK 5x100 hubcentric wheel spacers move compatible wheels outward by 1 inch, or approximately 25 mm. They are intended for vehicle and wheel setups that match a 5x100 bolt pattern, 56.1 mm center bore, and M12x1.25 wheel-stud thread pitch. The four-piece package is designed for drivers who want to adjust both front and rear wheel position with the same thickness.\u003c\/p\u003e\n\u003cp\u003eA spacer can be useful when an aftermarket wheel has a high positive offset, the tire sits close to a strut or coilover, or the factory wheel position looks deeply tucked inside the fender. The spacer changes effective wheel offset, so it must be selected from measurements rather than from vehicle name alone.\u003c\/p\u003e\n\u003ch3\u003eScenario-Based Fitment Solutions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner tire-to-strut clearance:\u003c\/strong\u003e The 1 inch thickness may create more room between the inner tire sidewall and the strut, spring perch, or coilover body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-offset replacement wheels:\u003c\/strong\u003e Moving the wheel outward can help correct an overly inward wheel position when the bolt pattern and center bore already match.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake and wheel-barrel clearance:\u003c\/strong\u003e Additional wheel position may help with some spoke or barrel clearance issues, but the wheel must still clear the caliper and rotor during a test fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront and rear stance adjustment:\u003c\/strong\u003e A set of four supports a consistent 1 inch change at all four corners when the complete vehicle has enough fender clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the 1 Inch Thickness Changes\u003c\/h3\u003e\n\u003cp\u003eA 1 inch spacer moves each installed wheel outward by about 25 mm. This is a significant offset change. Before ordering, measure the existing inner clearance and the available space between the tire and the fender. Also consider tire sidewall bulge, wheel width, alignment, ride height, steering angle, and suspension compression.\u003c\/p\u003e\n\u003cp\u003eIf the vehicle is lowered or uses wider tires, test clearance at full steering lock and through the expected suspension travel. A setup that clears while parked can still contact the fender liner or body under cornering, braking, or road impact.\u003c\/p\u003e\n\u003ch3\u003eRequired Fitment Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle bolt pattern:\u003c\/strong\u003e 5x100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel bolt pattern:\u003c\/strong\u003e 5x100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub bore:\u003c\/strong\u003e 56.1 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread pitch:\u003c\/strong\u003e M12x1.25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpacer thickness:\u003c\/strong\u003e 1 inch \/ approximately 25 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage quantity:\u003c\/strong\u003e Set of 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Hubcentric bolt-on wheel spacer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese dimensions are critical. Do not substitute M12x1.5 hardware for the specified M12x1.25 thread pitch. Verify that both the vehicle hub and wheel center bore are compatible with the 56.1 mm hubcentric interface.\u003c\/p\u003e\n\u003ch3\u003eStud, Wheel Pocket, and Fender Checks\u003c\/h3\u003e\n\u003cp\u003eMeasure how far the original vehicle studs extend beyond the installed spacer mounting surface. If they protrude, the back of the wheel must have pockets deep enough to accept them without contact. The wheel must seat fully against the spacer with no gap.\u003c\/p\u003e\n\u003cp\u003eInstall only on clean, flat hub surfaces. Follow the correct torque specification and tightening sequence, then re-check torque after initial driving. Inspect brake, suspension, tire, and fender clearance before normal road use. Do not stack wheel spacers, and use professional installation if the wheel offset or stud-clearance measurements are uncertain.\u003c\/p\u003e","brand":"BDFHYK","offers":[{"title":"Default Title","offer_id":52604587311379,"sku":"BDDLZ-OS06205","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6110\/2355\/files\/bdfhyk_wheel_spacer_-_OS06063S1BK_c45e7446-45b5-428e-8b0c-0ff7b6cad588.webp?v=1777556164","url":"https:\/\/bdfhyk.com\/products\/5x100mm-wheel-spacers-1-inch-5-lug-wheel-adapters-m12x1-25-56-1-mm-hub-bore-set-of-4","provider":"BDFHYK","version":"1.0","type":"link"}