{"product_id":"5x112mm-wheel-spacers-12mm-5-lug-wheel-adapters-m14x1-5-110mm-hub-bore-set-of-4","title":"5x112 Hubcentric Wheel Spacers 12mm for Audi A3 A4 A5 A6 Q5 Volkswagen Passat Jetta Golf, M14x1.5 Studs, 57.1mm Hub Bore, Set of 2","description":"\u003ch2\u003e5x112 12 mm Hubcentric Wheel Spacers with Center-Bore Conversion\u003c\/h2\u003e\u003cp\u003eThese BDFHYK 5x112 wheel spacers are intended for a specific fitment situation: the vehicle-side hub bore is 57.1 mm, while the wheel-side centering diameter is 66.56 mm as listed. This design can help position a compatible 66.56 mm center-bore wheel on a 57.1 mm vehicle hub while also moving the wheel outward by 12 mm.\u003c\/p\u003e\u003cp\u003eThis is more than a basic same-bore slip-on spacer. Both the bolt pattern and the two center dimensions must match the planned setup. It may be useful for selected Audi and Volkswagen wheel combinations, but model names such as A3, A4, A5, A6, Q5, Passat, Jetta, and Golf include different generations and factory specifications. Confirm the exact vehicle hub and wheel center bore before ordering.\u003c\/p\u003e\u003ch3\u003eWhen This 12 mm Spacer May Be Useful\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter-bore transition:\u003c\/strong\u003e Supports a compatible setup using a 57.1 mm vehicle hub and a 66.56 mm wheel-side centering diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMild wheel-position adjustment:\u003c\/strong\u003e Moves the installed wheel outward by 12 mm to reduce an overly tucked position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner wheel clearance:\u003c\/strong\u003e May help when the tire or inner wheel surface sits close to brake or suspension components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-axle correction:\u003c\/strong\u003e The set of two can be used on one axle when equal spacing is required on both sides.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Product Parameters\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle and wheel bolt pattern:\u003c\/strong\u003e 5x112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpacer thickness:\u003c\/strong\u003e 12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-side hub bore:\u003c\/strong\u003e 57.1 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel-side centering diameter:\u003c\/strong\u003e 66.56 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware reference:\u003c\/strong\u003e M14x1.5; confirm exact extended hardware and seat style\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage quantity:\u003c\/strong\u003e Set of 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary function:\u003c\/strong\u003e Center-bore transition plus a 12 mm outward wheel-position change\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy Both Center Dimensions Matter\u003c\/h3\u003e\u003cp\u003eA 57.1 mm vehicle-side bore must seat correctly on the hub, while the 66.56 mm wheel-side centering surface must be compatible with the selected wheel. If either dimension is incorrect, the wheel may not seat as intended. Do not assume fitment from the 5x112 bolt pattern alone. Also confirm that the wheel mounting pad clears the spacer lip and that the wheel can sit completely flat.\u003c\/p\u003e\u003ch3\u003eHardware and Clearance Checks\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConfirm the vehicle and wheel both use a 5x112 bolt pattern.\u003c\/li\u003e\n\u003cli\u003eMeasure the vehicle hub at 57.1 mm and the selected wheel center opening for the 66.56 mm interface.\u003c\/li\u003e\n\u003cli\u003eConfirm M14x1.5 thread compatibility, wheel bolt or stud length, and the correct lug-seat style.\u003c\/li\u003e\n\u003cli\u003eBecause the spacer is 12 mm thick, compatible extended hardware may be required to maintain proper thread engagement.\u003c\/li\u003e\n\u003cli\u003eCheck brake-caliper, suspension, tire, fender, and liner clearance.\u003c\/li\u003e\n\u003cli\u003eCalculate the final wheel position after the 12 mm outward change.\u003c\/li\u003e\n\u003cli\u003eConfirm that a set of two is the correct quantity for the axle being modified.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation and Inspection\u003c\/h3\u003e\u003cp\u003eClean all hub, spacer, and wheel mounting surfaces and verify complete seating before tightening. Use only compatible hardware with adequate thread engagement and follow the applicable torque procedure. Do not stack spacers or install over damaged mounting surfaces. Recheck torque after initial driving and inspect the spacer and hardware during routine wheel service.\u003c\/p\u003e","brand":"BDFHYK","offers":[{"title":"Default Title","offer_id":52604639674643,"sku":"BDDLZ-OS06869BK-2","price":41.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6110\/2355\/files\/OS06216.webp?v=1779958406","url":"https:\/\/bdfhyk.com\/products\/5x112mm-wheel-spacers-12mm-5-lug-wheel-adapters-m14x1-5-110mm-hub-bore-set-of-4","provider":"BDFHYK","version":"1.0","type":"link"}