{"product_id":"5x112mm-wheel-spacers-12mm-forged-5-lug-wheel-adapters-66-56-mm-hub-bore-set-of-2","title":"5x112 Hubcentric Wheel Spacers 12mm for Audi A3 A4 TT Volkswagen CC Beetle Phaeton, 66.56mm Hub Bore, Set of 2","description":"\u003ch2\u003e5x112 12 mm Hubcentric Wheel Spacers with 66.56 mm Center Bore\u003c\/h2\u003e\u003cp\u003eThese BDFHYK 5x112 wheel spacers provide a 12 mm outward wheel-position change for compatible vehicles and wheels using a 66.56 mm center-bore interface. They are intended for selected Audi and Volkswagen applications where the exact hub, wheel, bolt pattern, and mounting hardware match the listed dimensions.\u003c\/p\u003e\u003cp\u003eA 12 mm spacer is commonly considered when the wheel sits slightly too far inward, the inner wheel surface is close to a brake or suspension component, or a mild stance adjustment is preferred over a larger offset change. The product does not change the 5x112 bolt pattern. It changes wheel position and available inner and outer clearance.\u003c\/p\u003e\u003ch3\u003eUseful Scenarios for a 12 mm Spacer\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinor wheel tuck:\u003c\/strong\u003e Moves the wheel outward by 12 mm for a more filled-out position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner wheel clearance:\u003c\/strong\u003e May add space near brake calipers, struts, suspension links, or the tire sidewall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAftermarket wheel fitment:\u003c\/strong\u003e Can help when a compatible wheel's offset places it too far inward.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-axle adjustment:\u003c\/strong\u003e The set of two provides equal spacing on the left and right side of one axle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNecessary Product Parameters\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle and wheel bolt pattern:\u003c\/strong\u003e 5x112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpacer thickness:\u003c\/strong\u003e 12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bore:\u003c\/strong\u003e 66.56 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct style:\u003c\/strong\u003e Hubcentric slip-on spacer when the hub and wheel dimensions match\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage quantity:\u003c\/strong\u003e Set of 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Wheel bolts are not included; compatible extended hardware may be required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed applications:\u003c\/strong\u003e Selected Audi A3, A4, TT and Volkswagen CC, Beetle, and Phaeton setups using the exact dimensions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy Hardware Length Must Be Checked\u003c\/h3\u003e\u003cp\u003eA 12 mm spacer places additional material between the wheel and hub. The mounting hardware must retain adequate usable thread engagement after that change. Do not assume the original wheel bolts are suitable. Confirm the required extended bolt or stud length, thread specification, wheel-seat style, and mounting-pad design. Hardware that bottoms out or does not engage sufficiently should not be used.\u003c\/p\u003e\u003ch3\u003eFitment Checklist\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVerify that both the vehicle and wheel use a 5x112 pattern.\u003c\/li\u003e\n\u003cli\u003eConfirm the hub and wheel are compatible with the 66.56 mm center-bore design.\u003c\/li\u003e\n\u003cli\u003eMeasure the needed inner clearance and ensure 12 mm is sufficient.\u003c\/li\u003e\n\u003cli\u003eCheck the resulting tire position against the fender and liner.\u003c\/li\u003e\n\u003cli\u003eConfirm brake-caliper, suspension, hub-lip, and wheel mounting-pad clearance.\u003c\/li\u003e\n\u003cli\u003eSelect compatible extended mounting hardware with the correct thread and lug-seat type.\u003c\/li\u003e\n\u003cli\u003eConfirm that a set of two is appropriate for the axle being modified.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation and Follow-Up Inspection\u003c\/h3\u003e\u003cp\u003eClean the hub, spacer, and wheel mounting faces before installation. The spacer and wheel must sit completely flat with no trapped debris or interference. Tighten compatible hardware with a calibrated torque wrench using the applicable procedure. Do not stack spacers. Recheck torque after initial driving and inspect the spacer whenever the wheel is removed.\u003c\/p\u003e","brand":"BDFHYK","offers":[{"title":"Default Title","offer_id":52604587835667,"sku":"BDDLZ-OS06207","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6110\/2355\/files\/71raHfxTVbL._AC_SL1500.jpg?v=1762520049","url":"https:\/\/bdfhyk.com\/products\/5x112mm-wheel-spacers-12mm-forged-5-lug-wheel-adapters-66-56-mm-hub-bore-set-of-2","provider":"BDFHYK","version":"1.0","type":"link"}