{"product_id":"5x114-3mm-wheel-bolt-pattern-1-inch-5-lug-wheel-adapters-m12x1-5-67-1-mm-hub-bore-set-of-4","title":"5x114.3 Hubcentric Wheel Spacers 1 Inch for Mazda CX-5 CX-7 Hyundai Azera Kia Amanti Chrysler 200 Sebring, M12x1.5 Studs, 67.1mm Hub Bore, Set of 4","description":"\u003ch2\u003e1 Inch 5x114.3 Hubcentric Wheel Spacers for Mazda, Hyundai, Kia, and Chrysler\u003c\/h2\u003e\u003cp\u003eThese BDFHYK wheel spacers are intended for compatible Mazda CX-5, CX-7, selected Hyundai Azera, Kia Amanti, Chrysler 200, Sebring, and other listed 5x114.3 applications using a 67.1 mm hub bore and M12x1.5 wheel hardware. The 1 inch thickness moves each wheel outward by approximately 25.4 mm.\u003c\/p\u003e\u003cp\u003eThis four-piece set is intended for a consistent front-and-rear change only when both axles have enough inner and outer clearance. It may help correct a tucked wheel position or create measured space near inner tire, brake, or suspension components.\u003c\/p\u003e\u003ch3\u003eWhen These Wheel Spacers May Help\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMove compatible wheels outward when the current setup sits too far inward.\u003c\/li\u003e\n\u003cli\u003eMay create additional inner clearance near brake, suspension, or tire components.\u003c\/li\u003e\n\u003cli\u003eSupport selected aftermarket wheels when offset and center-bore measurements are compatible.\u003c\/li\u003e\n\u003cli\u003eCreate a wider wheel position without changing the wheel itself.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Fitment Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt pattern:\u003c\/strong\u003e 5x114.3 \/ 5x4.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 1 inch \/ approximately 25.4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter bore:\u003c\/strong\u003e 67.1 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread pitch:\u003c\/strong\u003e M12x1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage quantity:\u003c\/strong\u003e Set of 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed applications:\u003c\/strong\u003e Compatible Mazda CX-5 and CX-7, selected Hyundai Azera, Kia Amanti, Chrysler 200 and Sebring applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eMeasure Before Ordering\u003c\/h3\u003e\u003cp\u003eVehicle listings are a starting point, not a substitute for measuring the actual hub and wheel. Confirm the bolt pattern, vehicle-hub diameter, wheel center bore, thread pitch, wheel offset, wheel width, tire size, lug-seat style, brake package, and suspension configuration. Check original stud protrusion and the depth of the wheel pockets so the wheel can sit fully flat against the spacer. Also measure fender and liner clearance at ride height, full steering lock, and expected suspension compression.\u003c\/p\u003e\u003ch3\u003eInstallation and Torque Checks\u003c\/h3\u003e\u003cp\u003eClean rust, paint buildup, and debris from every mounting face. The spacer must sit flush against the hub, and the wheel must sit flush against the spacer. Tighten compatible hardware in a star pattern with a calibrated torque wrench and the applicable vehicle or hardware specification. Do not stack spacers or install them over damaged studs, lug nuts, or uneven mounting surfaces. Recheck torque after initial driving and during routine wheel service. Professional installation is recommended when fitment or clearance is uncertain.\u003c\/p\u003e","brand":"BDFHYK","offers":[{"title":"Default Title","offer_id":52604624896275,"sku":"BDDLZ-OS06321BK-4","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6110\/2355\/files\/bdfhyk_wheel_spacer_-_OS06063S1BK_c45e7446-45b5-428e-8b0c-0ff7b6cad588.webp?v=1777556164","url":"https:\/\/bdfhyk.com\/products\/5x114-3mm-wheel-bolt-pattern-1-inch-5-lug-wheel-adapters-m12x1-5-67-1-mm-hub-bore-set-of-4","provider":"BDFHYK","version":"1.0","type":"link"}