{"product_id":"5x115mm-spacers-1inch-5-lug-wheel-adapters-m14x1-5-71-5mm-hub-bore-set-of-2","title":"BDFHYK 5x115 Hubcentric Wheel Spacers 20mm \/ 1 Inch \/ 1.25 Inch for Dodge Challenger Charger Chrysler 300 Magnum, M14x1.5, 71.5mm Hub Bore, Set of 2","description":"\u003ch2\u003e5x115 Hubcentric Wheel Spacers for Dodge Challenger, Charger, and Chrysler 300\u003c\/h2\u003e\n\u003cp\u003eThese BDFHYK 5x115 hubcentric wheel spacers are designed for compatible Dodge Challenger, Dodge Charger, Chrysler 300, Magnum, and related applications that use a 71.5 mm hub bore and M14x1.5 thread pitch. They are intended for drivers who want to adjust wheel position, reduce a tucked look, or create additional inner clearance for selected wheel and tire setups.\u003c\/p\u003e\n\u003cp\u003eThis set of 2 is suitable when you only need spacing on one axle, such as correcting front clearance near brake components or adjusting rear wheel position for a more balanced stance. It can also be used when front and rear fitment requirements are different. Always measure each axle separately before selecting thickness because tire size, wheel offset, brake package, and suspension setup can vary.\u003c\/p\u003e\n\u003ch3\u003eScenario-Based Solutions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-axle stance correction:\u003c\/strong\u003e Helps adjust either the front or rear wheel position without changing all four corners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake or suspension clearance:\u003c\/strong\u003e May help create extra space when the wheel or tire sits too close to inner components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMuscle car fitment adjustment:\u003c\/strong\u003e Useful for Challenger, Charger, and Chrysler 300 owners looking for a cleaner wheel-to-fender appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAftermarket wheel setup:\u003c\/strong\u003e Helps fine-tune offset when the selected wheel sits too far inward.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNecessary Fitment Parameters\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt pattern:\u003c\/strong\u003e 5x115\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub bore:\u003c\/strong\u003e 71.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread pitch:\u003c\/strong\u003e M14x1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness options:\u003c\/strong\u003e 20 mm, 1 inch, and 1.25 inch, depending on selected variant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack quantity:\u003c\/strong\u003e Set of 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications:\u003c\/strong\u003e Compatible Dodge Challenger, Charger, Chrysler 300, Magnum, and listed 5x115 applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing the Right Thickness\u003c\/h3\u003e\n\u003cp\u003eChoose 20 mm when the goal is a moderate millimeter-based fitment correction. Choose 1 inch when a more visible outward position is needed while still keeping the setup controlled. Choose 1.25 inch when the vehicle has been measured and needs more clearance or a stronger stance change. Always check both outer fender clearance and inner component clearance before ordering.\u003c\/p\u003e\n\u003ch3\u003eFitment Checks Before Installation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm 5x115 bolt pattern, 71.5 mm hub bore, and M14x1.5 thread pitch.\u003c\/li\u003e\n\u003cli\u003eCheck whether you need a front pair, rear pair, or a full four-corner setup.\u003c\/li\u003e\n\u003cli\u003eMeasure tire-to-fender clearance on the axle where the spacer will be installed.\u003c\/li\u003e\n\u003cli\u003eCheck brake caliper, strut, control arm, and inner liner clearance.\u003c\/li\u003e\n\u003cli\u003eVerify that the wheel mounting pad can sit flat after the spacer is installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation and Maintenance\u003c\/h3\u003e\n\u003cp\u003eInstall on clean hub surfaces only. Tighten hardware in a star pattern with a torque wrench and follow the vehicle manufacturer’s torque specification. Do not stack wheel spacers, install on damaged studs, or drive if the wheel does not seat flat. Recheck torque after the first drive and inspect hardware during routine tire rotations.\u003c\/p\u003e","brand":"BDFHYK","offers":[{"title":"1 Inch","offer_id":54187389878547,"sku":"BDDLZ-OS06868S2BK-2","price":60.49,"currency_code":"USD","in_stock":true},{"title":"2 Inch","offer_id":54187389911315,"sku":"BDDLZ-OS06868S1BK-2","price":56.49,"currency_code":"USD","in_stock":true},{"title":"1.25 Inch","offer_id":54187389944083,"sku":"BDDLZ-OS06868S3BK-2","price":66.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6110\/2355\/files\/71XABjdIk_L._AC_SL1500.jpg?v=1762523085","url":"https:\/\/bdfhyk.com\/products\/5x115mm-spacers-1inch-5-lug-wheel-adapters-m14x1-5-71-5mm-hub-bore-set-of-2","provider":"BDFHYK","version":"1.0","type":"link"}