{"product_id":"5x115mm-wheel-spacers-1-5inch-5-lug-wheel-adapters-m14x1-5-71-5mm-hub-bore-set-of-4","title":"5x115 Hubcentric Wheel Spacers 1.5 Inch for Dodge Challenger Charger Chrysler 300 Magnum, M14x1.5 Studs, 71.5mm Hub Bore, Set of 4","description":"\u003ch2\u003e5x115 Hubcentric Wheel Spacers 1.5 Inch for Dodge and Chrysler Applications\u003c\/h2\u003e\n\u003cp\u003eThese BDFHYK 1.5 inch 5x115 hubcentric wheel spacers are designed for compatible Dodge Challenger, Dodge Charger, Chrysler 300, Magnum, and related 5x115 applications that use a 71.5 mm hub bore and M14x1.5 thread pitch. They are intended for drivers who need a stronger outward wheel position than a mild spacer can provide, while still verifying clearance before installation.\u003c\/p\u003e\n\u003cp\u003eA 1.5 inch spacer is commonly considered when the wheels sit noticeably inside the fenders, when wider tires need additional inner clearance, or when a vehicle needs a more balanced front-to-rear stance. This product is available as a 2-piece or 4-piece selection, so users can choose one-axle correction or full-vehicle spacing depending on their fitment goal.\u003c\/p\u003e\n\u003ch3\u003eScenario-Based Solutions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuller muscle car stance:\u003c\/strong\u003e Helps move compatible wheels outward for a stronger wheel-to-fender appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront or rear axle correction:\u003c\/strong\u003e Choose 2 pieces when only one axle needs spacing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-corner stance match:\u003c\/strong\u003e Choose 4 pieces when the goal is consistent spacing at all four wheels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner clearance support:\u003c\/strong\u003e May help create space near brake, suspension, or inner wheel well areas when the issue is related to offset.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCore Product Parameters\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt pattern:\u003c\/strong\u003e 5x115\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub bore:\u003c\/strong\u003e 71.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread pitch:\u003c\/strong\u003e M14x1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 1.5 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack options:\u003c\/strong\u003e 2 pieces or 4 pieces, depending on selected variant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications:\u003c\/strong\u003e Compatible Dodge Challenger, Charger, Chrysler 300, Magnum, and listed 5x115 applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen 1.5 Inch Makes Sense\u003c\/h3\u003e\n\u003cp\u003eThe 1.5 inch thickness is best for users who have already measured their setup and want a clear outward change. It can be helpful when a smaller spacer does not provide enough stance correction or inner clearance. Because this thickness changes the wheel position more noticeably, measure fender clearance, tire sidewall position, wheel pocket depth, and steering\/suspension movement before installing.\u003c\/p\u003e\n\u003ch3\u003eInstallation Checklist\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm 5x115 bolt pattern, 71.5 mm center bore, and M14x1.5 thread pitch.\u003c\/li\u003e\n\u003cli\u003eClean the hub face and wheel mounting surface before installation.\u003c\/li\u003e\n\u003cli\u003eCheck that the spacer sits flat against the hub with no gap.\u003c\/li\u003e\n\u003cli\u003eVerify wheel pocket depth and make sure the wheel seats flat on the spacer.\u003c\/li\u003e\n\u003cli\u003eUse a torque wrench and follow the vehicle manufacturer’s torque specification.\u003c\/li\u003e\n\u003cli\u003eDo not stack spacers or install over damaged wheel studs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter installation, recheck torque after the initial drive and inspect the hardware during routine tire service. Professional installation is recommended if you are unsure about clearance measurement or wheel hardware compatibility.\u003c\/p\u003e","brand":"BDFHYK","offers":[{"title":"Default Title","offer_id":52604636627219,"sku":"BDDLZ-OS06868S4BK","price":110.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6110\/2355\/files\/OS06061S1BK.webp?v=1779962221","url":"https:\/\/bdfhyk.com\/products\/5x115mm-wheel-spacers-1-5inch-5-lug-wheel-adapters-m14x1-5-71-5mm-hub-bore-set-of-4","provider":"BDFHYK","version":"1.0","type":"link"}