{"product_id":"6x5-5-6x139-7mm-6-lug-m14x1-5-studs-108mm-hub-bore-set-of-4-no-lip","title":"6x139.7 Wheel Spacers 1\/1.25\/1.5\/2 Inch for Chevy Silverado 1500, Tahoe, Suburban \u0026 GMC Sierra 1500, Yukon, M14x1.5 Studs, 108mm Hub Bore, Set of 4 | BDFHYK","description":"\u003ch2\u003e6x139.7 Wheel Spacers with 108 mm Hub Bore for Chevy and GMC Trucks\u003c\/h2\u003e\n\u003cp\u003eThese BDFHYK 6x139.7 wheel spacers are built for compatible Chevrolet Silverado 1500, Tahoe, Suburban, GMC Sierra 1500, Yukon, and related 6-lug applications that require M14x1.5 studs and a 108 mm hub bore. They are designed for drivers who need a practical way to adjust wheel position, improve stance, or create additional inner clearance for certain wheel and tire combinations.\u003c\/p\u003e\n\u003cp\u003eThis style is a good fitment solution when the wheels sit too far inside the fender line, when a wider tire setup needs more inner room, or when an aftermarket wheel has an offset that places the tire close to suspension or brake components. The spacer moves the wheel outward, but the final result depends on your vehicle, wheel offset, tire width, ride height, and body clearance.\u003c\/p\u003e\n\u003ch3\u003eCommon Fitment Problems This Spacer Can Help Address\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory wheels look tucked:\u003c\/strong\u003e Helps move compatible wheels outward for a wider truck appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAftermarket wheel offset is too positive:\u003c\/strong\u003e May help correct an inward wheel position caused by wheel offset selection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTire sidewall is close to suspension parts:\u003c\/strong\u003e Can create additional clearance when rubbing comes from the inner side of the wheel\/tire area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed the same spacing on all four corners:\u003c\/strong\u003e Set of 4 supports front and rear installation for a consistent stance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEssential Fitment Parameters\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt pattern:\u003c\/strong\u003e 6x139.7 \/ 6x5.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub bore:\u003c\/strong\u003e 108 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread pitch:\u003c\/strong\u003e M14x1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e Set of 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable thickness:\u003c\/strong\u003e 1 inch, 1.25 inch, 1.5 inch, and 2 inch, depending on selected variant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThickness Selection Guide\u003c\/h3\u003e\n\u003cp\u003eThe 1 inch and 1.25 inch options are better suited for subtle stance correction or minor inner clearance needs. The 1.5 inch and 2 inch options create a more visible outward wheel position and should be measured carefully before ordering. Always check fender clearance at full steering lock, brake line clearance, suspension compression, and tire movement under load.\u003c\/p\u003e\n\u003ch3\u003eWhat to Measure Before Installation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMeasure the space between the tire sidewall and fender edge.\u003c\/li\u003e\n\u003cli\u003eCheck front wheel clearance while turning left and right.\u003c\/li\u003e\n\u003cli\u003eInspect clearance around brake calipers, control arms, sway bar links, and inner liners.\u003c\/li\u003e\n\u003cli\u003eConfirm that the wheel center bore and lug seat style match the vehicle and hardware.\u003c\/li\u003e\n\u003cli\u003eCheck wheel pocket depth so the original studs do not interfere with the back of the wheel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstall only on clean, flat hub surfaces. The spacer should sit evenly against the hub before the wheel is mounted. Use a torque wrench, follow the vehicle manufacturer’s torque specification, and recheck torque after the initial drive. Do not stack wheel spacers, modify the spacer, or install over damaged wheel studs. If the vehicle is used for towing, hauling, or rough roads, inspect the hardware more frequently as part of regular maintenance.\u003c\/p\u003e","brand":"BDFHYK","offers":[{"title":"1 Inch","offer_id":54137760121107,"sku":"BDDLZ-KT06062S1BK","price":75.99,"currency_code":"USD","in_stock":true},{"title":"1.25 Inch","offer_id":54137781387539,"sku":"BDDLZ-KT06062S2BK","price":86.99,"currency_code":"USD","in_stock":true},{"title":"1.5 Inch","offer_id":54137769459987,"sku":"BDDLZ-KT06062S3BK","price":89.99,"currency_code":"USD","in_stock":true},{"title":"2 Inch","offer_id":54137784500499,"sku":"BDDLZ-OS06062S4BK","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/6110\/2355\/files\/bdfhyk_wheel_spacer_-_KT06062S1BK.webp?v=1777557085","url":"https:\/\/bdfhyk.com\/products\/6x5-5-6x139-7mm-6-lug-m14x1-5-studs-108mm-hub-bore-set-of-4-no-lip","provider":"BDFHYK","version":"1.0","type":"link"}