E3707M Fuel Pump Module Assembly For 05-06 Chevrolet SSR, 05-07 Buick Rainier, Chevy Trailblazer, GMC Envoy

E3707M Fuel Pump Module for Rainier, Trailblazer, Envoy, SSR, Ascender, and 9-7X

Extended cranking, intermittent no-start, low fuel pressure, hesitation under load, stalling, abnormal pump operation, or an inaccurate fuel-gauge reading can involve the in-tank module. This BDFHYK E3707M electric fuel pump module assembly is an aftermarket replacement for specific 2005–2007 GM-platform SUV applications and 2005–2006 Chevrolet SSR models. Confirm the exact year, engine, wheelbase, tank design, pressure-sensor configuration, connector, module height, sender layout, and OE number before installation.

Confirm E3707M Vehicle and Engine Fitment

• 2005–2007 Buick Rainier with the 4.2L L6 or 5.3L V8 engine
• 2005–2006 Chevrolet SSR with the 6.0L V8 engine
• 2005–2007 Chevrolet Trailblazer with the 4.2L L6; listed 2006–2007 5.3L or 6.0L V8 configurations
• 2005–2007 GMC Envoy with the 4.2L L6 or 5.3L V8 engine
• 2005–2007 Isuzu Ascender with the 4.2L L6 or 5.3L V8 engine
• 2005–2007 Saab 9-7X with the 4.2L L6 or 5.3L V8 engine

The previous Rainier description incorrectly listed a 2.4L engine. E3707M application data uses 4.2L L6 and 5.3L V8 configurations. Some Trailblazer, Envoy, and Ascender applications also require the matching 113-inch wheelbase and tank layout.

E3707M OE and Interchange Number Check

Listed references include E3707M, P76217M, F2718A, FG0515, FG0516, FG0833, SP6006M, 530-2273, 67508, MU1655, 88966955, 88967148, 19153374, 19418261, 19178476, 19168752, and 21998332.

Reference P76217M configurations include the fuel-level sender, strainer, seal, and fuel-tank pressure sensor, while the lock ring is not normally included. Confirm the actual package contents and compare the pressure sensor, connector, flange, line fittings, module height, reservoir, sender, float arm, and tank opening.

Check the Fuel System Before Replacing E3707M

• Measure fuel pressure during key-on, cranking, idle, and load
• Check pump voltage, ground, relay, fuse, wiring, connector terminals, and control command
• Inspect the filter, lines, pressure-control components, injectors, and tank venting
• Test the sender, gauge circuit, and tank-pressure sensor circuit separately

Clean rust, sediment, water, degraded fuel, and debris from the tank before installing the replacement module.

E3707M Installation Notes

Relieve fuel pressure, disconnect the battery, support the tank correctly, and clean the module opening. Compare the old and new assemblies, use the correct seal, and confirm lock-ring engagement. After installation, prime the system, verify fuel pressure, inspect for leaks, confirm fuel-gauge operation, and scan for fuel-level or evaporative-system faults.

Before Ordering the E3707M Fuel Pump Assembly

• Confirm the exact model, year, engine, wheelbase, and tank configuration
• Use 2005–2006 for Chevrolet SSR, not a broader 2005–2007 range
• Verify Rainier 4.2L or 5.3L fitment; do not use the previous 2.4L typo
• Match E3707M or the applicable OE/interchange number
• Compare the connector, lines, pressure sensor, module height, sender, and float arm

This is a BDFHYK aftermarket replacement fuel pump module assembly, not a Buick, Chevrolet, GMC, Isuzu, Saab, or GM factory OEM component.