E2582M Fuel Pump Module Assembly For 2011-2016 F-250 Super Duty V8 6.2L

E2582M Fuel Pump Module for 2011–2016 Ford F-250 and F-350 Super Duty

Extended cranking, intermittent no-start, fuel-pressure loss under load, stalling, or an inaccurate fuel-gauge reading can involve the in-tank module. This BDFHYK E2582M electric fuel pump module assembly is an aftermarket replacement for listed 2011–2016 Ford F-250 and F-350 Super Duty 6.2L V8 applications. Confirm the truck configuration, tank size and position, wheelbase, connector, module height, sender layout, and OE number before installation.

Confirm E2582M Super Duty Fitment

2011–2016 Ford F-250 Super Duty 6.2L V8

The listed F-250 application covers 2011–2016 trucks with the 6.2L V8 engine. Tank configuration can vary with cab, bed, wheelbase, and equipment, so compare the removed module before installation.

2011–2016 Ford F-350 Super Duty 6.2L V8

E2582M references also list 2011–2016 F-350 Super Duty 6.2L V8 applications. The current product title names F-250 only, so verify the F-350 tank, connector, flange, line fittings, module depth, pickup, and sender before use.

E2582M and BC3Z-9H307-D Cross-Reference

Listed OE and Interchange Numbers

E2582M, P76865M, FG1326, SP2474M, BC3Z-9H307-D, and PFS600.

Match the Reference to the Exact Truck Tank

The part number must be checked with the physical fuel tank and module. Compare tank size and position, module flange, electrical connector, fuel-line fittings, overall height, pickup reach, strainer orientation, sender, and float-arm geometry.

Check the Super Duty Fuel System Before Replacement

Pressure and Electrical Testing

• Measure fuel pressure during key-on, cranking, idle, and load
• Check voltage and ground at the module connector
• Inspect the relay, fuse, wiring, terminals, and pump control command
• Check the fuel filter, lines, tank venting, pressure-control components, and injectors

Separate Fuel Delivery and Gauge Faults

A no-start or pressure concern can result from the pump circuit or another fuel-system fault. An inaccurate gauge can result from the sender, float arm, wiring, connector, instrument circuit, or tank interference. Test each circuit before replacing the complete assembly.

F-250 and F-350 Super Duty Installation Notes

Safely Support the Larger Truck Fuel Tank

Relieve fuel pressure, disconnect the battery, support the vehicle securely, and use equipment suitable for the tank's size and weight. Clean the top of the tank before opening it and remove contamination that could damage the replacement pump.

Verify Module Depth, Pickup Reach, and Float Travel

Compare the new and removed assemblies before installation. Check connector indexing, line connections, flange, module height, pickup, strainer, sender, float-arm sweep, seal placement, and lock-ring engagement. Prime the system, verify pressure, inspect for leaks, and confirm gauge operation after installation.

Before Ordering the E2582M Fuel Pump Assembly

Super Duty Module Checklist

• Confirm 2011–2016 F-250 or F-350 Super Duty with the 6.2L V8 engine
• Verify cab, bed, wheelbase, tank size, and tank position
• Match E2582M, BC3Z-9H307-D, or the applicable interchange number
• Compare the connector, flange, and fuel-line fittings
• Compare module height, pickup, sender, and float arm
• Confirm seals, lock rings, and hardware shown with the product

This is a BDFHYK aftermarket replacement fuel pump module assembly, not a Ford factory OEM component.