E7094M Fuel Pump Module Assembly For Chrysler Grand Voyager/Town & Country/Voyager,Dodge Caravan/Grand Caravan

E7094M Fuel Pump Module for Chrysler, Dodge, and Plymouth Minivans

Extended cranking, intermittent no-start, low or unstable fuel pressure, hesitation under load, stalling, abnormal pump operation, or an inaccurate fuel-gauge reading can involve the in-tank module. This BDFHYK E7094M electric fuel pump module assembly is an aftermarket replacement for specific 1996–2000 Chrysler, Dodge, and Plymouth minivan gasoline applications. Fitment varies by model, year, engine, trim, tank, connector, and sender arrangement, so compare the original module and OE number before installation.

Confirm E7094M Minivan Fitment

Chrysler Applications

• 1996–2000 Chrysler Town & Country with listed 3.3L or 3.8L V6 configurations
• 2000 Chrysler Voyager with listed 2.4L L4, 3.0L V6, or 3.3L V6 configurations
• 2000 Chrysler Grand Voyager with listed 3.0L, 3.3L, or 3.8L V6 configurations

Dodge and Plymouth Applications

• 1996–2000 Dodge Caravan and Grand Caravan in listed gasoline engine and trim configurations
• 1996–2000 Plymouth Voyager and Grand Voyager in listed gasoline engine and trim configurations

Applicable Dodge and Plymouth configurations can use 2.4L, 3.0L, 3.3L, or 3.8L engines depending on model, year, and trim. Confirm the VIN-based catalog entry rather than treating every engine as universal.

E7094M OE and Interchange Number Check

Listed references include E7094M, FG0215, P74706M, SP6143M, EFP117M, 953-3003, 520-2120, MU143, TU117, 67642, 4746250, 4897424AA, 4897424AB, 4897424AC, 4897424AD, and 4897424AE.

Comparable FG0215 configurations include the fuel-level sender and strainer but do not include a fuel-tank pressure sensor. Compare the tank opening, connector, fuel-line fittings, module depth, reservoir, sender, float arm, seal, and retaining-ring arrangement with the removed module.

Check the Minivan Fuel System Before Replacing E7094M

• Measure fuel pressure during key-on, cranking, idle, and load
• Check voltage and ground at the module under pump load
• Inspect the relay, fuse, wiring, connector, filter, lines, regulator, and injectors
• Test the sender and gauge circuit separately when the fuel-level reading is inaccurate

Clean rust, sediment, water, degraded fuel, and debris from the tank before installing the replacement module.

E7094M Installation Notes

Relieve fuel pressure, disconnect the battery, support and clean the tank, and compare the modules. Use the correct seal and retaining hardware. After installation, prime the system, verify fuel pressure, inspect every connection and the tank seal for leaks, confirm gauge operation, and recheck the electrical circuit.

Before Ordering the E7094M Fuel Pump Assembly

• Confirm the exact Chrysler, Dodge, or Plymouth model, year, engine, and trim
• Match E7094M or the applicable OE/interchange number
• Verify the fuel-tank design, connector, and module depth
• Compare the sender, float arm, pickup, seal, and retaining arrangement
• Confirm the actual package contents shown with the product

This is a BDFHYK aftermarket replacement fuel pump module assembly, not a Chrysler, Dodge, Plymouth, or Mopar factory OEM component.