These BDFHYK 5x120 hubcentric wheel spacers are designed for compatible BMW 3 Series, 5 Series, 7 Series, M3, M5, Z4, X1, and related applications that use a 72.56 mm hub bore and M12x1.5 wheel hardware specification. They are intended for BMW owners who want to fine-tune wheel position, reduce wheel tuck, improve visual fitment, or create additional clearance for selected wheel and brake combinations.
BMW fitment often depends on small measurements. A few millimeters can change how the wheel sits relative to the fender, brake caliper, strut, and inner liner. These spacers are useful when the wheel face sits too far inward, when a wheel needs extra brake caliper clearance, or when a staggered or aftermarket setup needs a more balanced stance. Final fitment depends on wheel width, offset, tire size, suspension height, camber, and model generation.
Choose 12 mm for subtle fitment correction where only a small outward change is needed. Choose 15 mm when the wheel needs a clearer visual improvement while keeping the change moderate. Choose 20 mm only after measuring fender clearance, tire sidewall position, and suspension compression. BMW fitment is sensitive, so the best choice should be based on actual measurements rather than appearance alone.
Install only on clean, flat hub surfaces. The spacer must sit flush against the hub, and the wheel must sit flush against the spacer. Use the correct wheel hardware length and seat style for your BMW wheels. Tighten with a torque wrench to the vehicle manufacturer’s specification and recheck torque after initial driving. Do not stack spacers or use them to compensate for damaged hubs, bent wheels, or incorrect wheel specifications.
BDFHYK 5x120 Hubcentric Wheel Spacers 12mm / 15mm / 20mm for BMW 3 Series 5 Series 7 Series M3 M5 Z4 X1, M12x1.5, 72.56mm Hub Bore, Set of 2
They fit my 03 cateye Silverado just fine! The after market wheels I got rubbed on the caliper so I got these to clear and they clear now. Definitely would recommend
Fit well looks good
Very satisfied, the instructions as well as the degree of pressure for screwing the Bolts should, I had 130 put...
These are a great quality product for the price, well made, fit the hub perfectly, put these on my 21 f150 and the factory stubs sit almost flush with the spacer. You could easily run 1.5" if your factory wheels have pockets on the back side.
The product arrived within the estimated time, and it was installed in 2 hours. The only thing you need is a 3/4-inch, thin, and long socket, preferably with a lever.
Fits perfectly ??
If you're fitting to your STI with stock wheels, you will need to grind the original studs. But once fitted, you are good. It's well made. Don't let the low price fool you.
Well made, quality hardware and they even sent some loctite.
Algooo bien me animare a poner las dos de atras
Quedaron perfectos sobresale pero no es algo wao pero me gusto como quedo
These spacers fit my 2018 Taco SR5 perfectly. They pushed the wheel out an inch all around, which was all they needed to fill the void. Looks terrific!
Bought them for my 2001 Toyota Land Cruiser, they seem fairly well made, however to install on the front wheels I had to use a file to for them to clear the inner axle nuts. Once I did that they fit fine.
Fit perfect
I used these on my Ranger so I could install BMW wheels
I used these on my Ranger so I could install BMW wheels
I used these on my Ranger so I could install BMW wheels
Excelente producto
Tengo mas de 4 meses de haber puesto mis espaciadores y le dio otro toque a la camioneta se ve espectacular y mas estable
S��per genial calza perfecto en mi honda accord 2009 sedan
Fitted perfectly no issues but I recently stripped a stud do you guys have an option to sell just the stud or at least one wheel spacer?
Here's a refined version of your message for clarity and flow:
?
The 1-inch still looks cool, but it wasn't wide enough for me. I found out that going with a 2-inch would actually make it street illegal. I'm happy with the 1-inch though �� it doesn't pass the fender, still adds some width, and enhances the overall look of vehicle.
Perfect fit as advertised, suv looks much better!
Solid build, easy to install.
