BDFHYK UF481 ignition coil and 7092 G-Power Platinum spark plug kit for Mitsubishi Endeavor and Galant 3.8L V6

6 UF481 ignition coils with 6 7092 BKR6EGP Platinum spark plugs for Mitsubishi 3.8L V6

UF481 coil pack and 7092 platinum spark plug set for Mitsubishi Endeavor 2004-2008

BDFHYK UF481 ignition coil kit for Mitsubishi Galant 2004-2007 3.8L V6

UF481 references MN187373 MR984160 with 7092 BKR6EGP platinum spark plugs

UF481 3-pin ignition coil and 7092 G-Power Platinum service kit

BDFHYK UF481 and 7092 six-coil six-plug kit for Mitsubishi 3.8L V6

BDFHYK 6 Ignition Coil UF481 and 6 Iridium Spark Plug 7092 For Mitsubishi Endeavor Galant V6 3.8L 2004-2008

$90.49

Product Detail

Type Ignition Coil + Spark Plug Set
SKU BDDLZ-BD-05-07438-CK
OE Number Coil: 49014, B167, C-767, GN10358, U5303, 06F905115F, MN187373, MR984160, UF481
OE Number For Spark plug:70924504

🚚 Estimated Delivery: Calculating... · Ships by Calculating... · Free Shipping

Trust & Assurance

Free Shipping · 2–7 Business Days

12-Month Warranty

30-Day Return

Secured Payment

UF481 Ignition Coil & 7092 G-Power Platinum Spark Plug Kit for Mitsubishi 3.8L V6

Rough idle, hard starting, hesitation under load, or a cylinder-specific misfire can involve an ignition coil or worn spark plug, but wiring, injectors, fuel delivery, intake leaks, sensors, compression, timing, and other mechanical conditions can create similar symptoms. This BDFHYK ignition service kit combines 6 ignition coils and 6 G-Power Platinum spark plugs for the listed applications below. Confirm the exact vehicle, engine, connector, and reference numbers before ordering.

UF481 / 7092 / BKR6EGP Vehicle Fitment

Vehicle	Years	Engine
Mitsubishi Endeavor	2004-2008	3.8L V6
Mitsubishi Galant	2004-2007	3.8L V6

Fitment note: The 7092 / BKR6EGP reference is a platinum spark plug application, not an iridium plug.

What Is Included in the UF481 & 7092 / BKR6EGP Ignition Kit?

6 ignition coils
6 G-Power Platinum spark plugs

UF481 Ignition Coil Reference Numbers

UF481, UF-481, MN187373, MR984160, 1832A070, GN10358, C1505.

UF481 / 7092 / BKR6EGP Service Scenarios

Rough Idle or Cold-Start Misfire

Inspect the affected ignition coil, spark plug, connector, wiring, boot area, and plug well before replacement. A cold-start or cylinder-specific misfire can also come from fuel delivery, air leaks, sensors, compression, or other mechanical conditions.

Hesitation During Acceleration or Load

A marginal ignition component can become more noticeable when cylinder pressure rises under acceleration or load. Confirm the affected cylinder and component condition rather than treating hesitation alone as proof of a failed coil.

Complete 3.8L V6 Ignition Maintenance

The 6+6 package matches a six-cylinder service quantity when the exact listed 3.8L V6 application, 3-pin connector, and original parts are confirmed.

How to Confirm UF481 and 7092 / BKR6EGP Fitment Before Ordering

Confirm the exact year, model, engine, and cylinder configuration.
Compare the original coil connector, keying, body, mounting point, boot profile, and printed references.
Confirm spark plug reference 7092 / BKR6EGP against the removed plug or exact vehicle service information.
Verify the package quantity matches the intended service plan and engine configuration.
Do not use a misfire DTC alone as proof that an ignition coil is faulty.

Installation Checks for the UF481 & 7092 / BKR6EGP Kit

Work on a cool engine and keep debris out of the spark plug wells.
Inspect connectors, wiring, boots, and plug wells for damage, corrosion, oil, or moisture.
Compare each new component with the removed part before installation.
Use the exact vehicle service specification for spark plug gap and tightening torque; do not guess.
Verify connector seating and recheck stored or returning misfire codes after service.

Important: These are BDFHYK OE-style aftermarket service components, not factory-branded parts. If symptoms remain after ignition service, continue diagnosis of the affected cylinder and related systems.

Technical Specifications

Brand	BDFHYK
Product Type	Ignition Coil + G-Power Platinum Spark Plug Kit
Primary Coil Reference	UF481
Spark Plug Reference	7092 / BKR6EGP
Spark Plug Construction	G-Power single platinum
Package Quantity	6 Ignition Coils + 6 Platinum Spark Plugs
Includes	6 Ignition Coils + 6 G-Power Platinum Spark Plugs
Engine	3.8L V6
Listed Vehicle Fitment	Mitsubishi Endeavor 2004-2008 3.8L V6; Mitsubishi Galant 2004-2007 3.8L V6
OE / Interchange References	UF481, UF-481, MN187373, MR984160, 1832A070, GN10358, C1505
Connector	3-pin; confirm keying and original coil before ordering
Common Service Scenarios	Cylinder-specific misfire diagnosis, rough idle, hesitation under load, hard starting, and six-cylinder ignition maintenance after component testing
Fitment Checks	Confirm exact year, 3.8L V6 engine, connector, coil body, mounting area, boot profile and UF481 / 7092 references
Installation Checks	Inspect wiring, connectors, boots and plug wells; compare removed parts; use exact Mitsubishi service information for spark plug gap and tightening torque
Important Note	7092 / BKR6EGP is a G-Power Platinum spark plug reference, not an iridium plug.

Difficulty Moderate

Estimated Time 0.5–1 hour

Tools Required

Screwdrivers
Service manual specific to your vehicle
Socket set and ratchet
Wrenches

Pre-Installation Checklist

Stop the engine before disassembling or replacing the ignition coil.
Check the spark plugs and spark plug wires as part of diagnosis.
Keep the installation area clean and dry.
Make sure the ignition coil connections are correct.
Refer to the service manual for your specific vehicle because removal order and connector or fastener details can vary by make and model.
Disconnect the negative battery cable before working on the ignition system.

Installation Steps

Disconnect the battery. Remove the negative battery cable by loosening the clamp bolt with a socket or wrench.
Locate the ignition coils on top of the engine. They may be attached to the engine block or surrounding components.
Disconnect and remove the old ignition coil. Remove the mounting bolts or screws and disconnect the electrical connector(s). The order can vary by vehicle, so follow the vehicle-specific service manual. Remove the old coil once fully disconnected.
If one coil serves multiple spark plugs and has multiple electrical connections, mark or label the connectors so they can be reattached to the correct terminals.
Install the new ignition coil in the reverse order of removal. Secure the mounting bolts or screws and reconnect the electrical connector(s) in the correct positions.
Reconnect the negative battery terminal. Hand-tighten the connection, then tighten the terminal bolt with a socket or wrench. Do not over-tighten.
Close the hood, start the engine with the vehicle in Park, and confirm it starts and idles normally. If it does, test-drive the vehicle.

Post-Installation Verification

Confirm the new ignition coil is securely mounted.
Confirm all electrical connectors are connected to the correct terminals.
Confirm the negative battery terminal is reconnected and tightened sufficiently without over-tightening.
Start the engine in Park and confirm it starts and idles normally.
If idle is normal, test-drive the vehicle and check for remaining misfire or drivability symptoms.

Troubleshooting

Spark plug and wire checks from the manual:
With the engine running, disconnect spark plug wires one at a time and observe engine-speed or roughness changes; the manual states that no significant change can indicate a bad spark plug.
The manual describes checking for spark by holding the end of a disconnected spark plug wire near a metal surface and looking or listening for a spark or cracking sound.
While the engine is cranked, check for spark at each spark plug wire; the manual states that no spark can indicate a dead wire.
Make sure battery, ignition, coil, and spark-plug wire connections are secure. Wiggle connections and retest if a loose connection is suspected.
Keep spark plug ends clean and free of dirt, oil, or grease; clean and retest before replacing a plug.
Inspect wires for cracked, cut, scraped, or burned insulation. Check boots and terminals for damage, corrosion, or poor contact.
Check for corrosion between the boot, spark plug, and ignition coil, and inspect the spark plug for discoloration or damage.
Inspect spring clips and wire retention at the distributor and spark plug ends to make sure connections are held securely.
Ignition coil failure can cause one or more cylinders to misfire, stuttering, sluggishness, and other drivability issues.

BDFHYK Ignition Coil Installation Guide

Q: Will the UF481 and 7092 kit fit my Mitsubishi?
A: It is listed for Mitsubishi Endeavor 2004-2008 and Galant 2004-2007 3.8L V6 applications. Confirm exact year, engine and references.

Q: What is included in this kit?
A: The package includes 6 UF481-style ignition coils and 6 7092 / BKR6EGP G-Power Platinum spark plugs.

Q: Are 7092 / BKR6EGP spark plugs iridium?
A: No. 7092 / BKR6EGP is a G-Power Platinum spark plug reference.

Q: Does the 6 + 6 quantity match the listed engine?
A: Yes, after exact 3.8L V6 fitment is confirmed, six coils and six plugs match a six-cylinder service quantity.

Q: Which ignition coil references should I compare?
A: Compare UF481, MN187373, MR984160, 1832A070, GN10358 and C1505 where applicable.

Q: Does a misfire code prove the ignition coil is faulty?
A: No. Wiring, injectors, fuel delivery, intake leaks, sensors, compression or mechanical faults can cause similar symptoms.

Q: Should all six coils and spark plugs be replaced together?
A: That depends on diagnosis, age, mileage and component condition. A complete V6 set can be practical when the service plan supports it.

Q: What connector should I compare?
A: Confirm the original coil uses the matching 3-pin connector and compare the keying before ordering.

Q: What should be compared before ordering?
A: Compare exact model year, 3.8L V6 engine, connector, coil body, mounting area, boot profile and printed references.

Q: What spark plug gap and torque should be used?
A: Use the exact Mitsubishi service specification for the specific engine.

Q: What if the engine still misfires after service?
A: Continue diagnosis of wiring, injectors, fuel delivery, intake leaks, sensors, compression and mechanical timing as applicable.

Returns & Refunds

We accept returns within 30 days of delivery for eligible items. If the product is unused and in original condition, you may request a return according to our refund policy. Full policy details: View Refund Policy . We recommend contacting our support team before initiating a return to ensure the fastest resolution.

Customer Support

If you purchased the wrong part, received an incompatible item, or need installation assistance, please contact us directly.

Email: service@bdfhyk.com

Business Hours:

Mon–Fri 9:00–18:00 (GMT+8)

Mon–Fri 19:00–04:00 (UTC−6 / CST)

Manufacturing Standards

Direct Factory Supply, Cost Saving
Integrated R&D, production, and warehousing. Eliminate middleman markups: same quality at lower prices, superior quality at same prices.

Precision Inspection, Commitment to Excellence
Rigorous inspection process, international certification standards. Each product includes individual inspection.