BDFHYK UF483 ignition coil and 7092 platinum spark plug kit for Audi A4 A6 3.0L V6

6 UF483 ignition coils and 6 7092 BKR6EGP platinum spark plugs

UF483 coil pack and 7092 platinum spark plug service set for Audi 3.0L V6

UF483 ignition coil replacement set for Audi A4 and A4 Quattro 3.0L V6

7092 platinum spark plugs with UF483 ignition coils for Audi A6 and A6 Quattro

UF483 06C905115 ignition coil and 7092 BKR6EGP spark plug reference kit

6-coil 6-plug UF483 7092 ignition kit for listed Audi 3.0L V6 applications

BDFHYK Ignition Coil UF483 and Iridium Spark Plug 7092 Fits For Audi A4/A6 Quattro 2002-2004, 3.0L V6,Sets of 6

$111.49

Type Ignition Coil + Spark Plug Set
SKU BDDLZ-BD-05-11315-6-CK
OE Number For Coil: 06C905115A, 06C905115B, 06C905115D, 06C905115E, 06C905115F, 06C905115G, 06C905115H, 06C905115K, 06C905115L, 06C905115M, 6C905115M, UF-483, UF483, GN10444, 6739301, C591, 1788338
OE Number For Spark plug:BKR6EGP, 7092

Trust & Assurance

Free Shipping · 3–7 Business Days

12-Month Warranty

30-Day Return

Secured Payment

Technical Specifications

Brand	BDFHYK
Product Type	Ignition Coil + Iridium Spark Plug Set
Primary Coil Reference	UF483
Spark Plug Reference	Replacement for 7092 / BKR6EGP
Package Quantity	6 ignition coils + 6 iridium spark plugs
Includes	6 Ignition Coils + 6 Iridium Spark Plugs
Ignition Coil Construction	Silicon steel core, high-temperature rubber, varnished copper wire
Spark Plug Construction	Iridium-tipped center electrode with ceramic insulator
Engine	3.0L V6
Listed Vehicle Fitment	Audi A4 2002-2005 3.0L V6; A4 Quattro 2002-2006 3.0L V6; A6 2002-2004 3.0L V6; A6 Quattro 2002-2004 3.0L V6
OE / Interchange References	Replacement for UF483, UF-483, 06C905115A, 06C905115B, 06C905115D, 06C905115E, 06C905115F, 06C905115G, 06C905115H, 06C905115K, 06C905115L, 06C905115M, 6C905115M, GN10444, 6739301, C591, 1788338
Common Service Scenarios	Cylinder misfire diagnosis, rough idle, hard starting, hesitation under load, and complete six-cylinder ignition maintenance
Fitment Checks	Confirm exact Audi model, year, 3.0L V6 engine, OE/interchange reference, connector shape and keying, coil body, mounting area, boot profile, spark plug interchange reference 7092/BKR6EGP, and service quantity before purchase
Installation Checks	Inspect coils, spark plugs, wiring, connectors, plug wells, oil or moisture; use exact vehicle service specifications for spark plug gap and tightening torque
Important Note	The included iridium spark plugs are replacements for the referenced 7092 / BKR6EGP application; this set includes 6 ignition coils and 6 iridium spark plugs for the listed 3.0L V6 applications

UF483 Ignition Coil & 7092 Platinum Spark Plug Kit for Audi A4/A6 3.0L V6

Rough idle, hard starting, hesitation under load, or a cylinder-specific misfire can involve an ignition coil or worn spark plug, but wiring, injectors, fuel delivery, intake leaks, sensors, compression, timing, and other mechanical conditions can create similar symptoms. This BDFHYK ignition service kit combines 6 UF483-style ignition coils with 6 7092 / BKR6EGP platinum spark plugs for the listed Audi A4, A4 Quattro, A6, and A6 Quattro 3.0L V6 applications.

Audi A4/A6 3.0L V6 Fitment for UF483 / 7092

Model	Years	Engine
A4	2002-2005	3.0L V6
A4 Quattro	2002-2006	3.0L V6
A6	2002-2004	3.0L V6
A6 Quattro	2002-2004	3.0L V6

Confirm the exact 3.0L V6 engine and original ignition components before ordering. Match the original coil reference, connector shape and keying, coil body, mounting area, boot profile, and spark plug reference.

What Is Included in the UF483 & 7092 Audi 3.0L V6 Ignition Set?

6 UF483-style ignition coils
6 7092 / BKR6EGP platinum spark plugs
Matched six-coil and six-plug service quantity for the listed 3.0L V6 applications

UF483 Coil and 7092 / BKR6EGP Spark Plug Reference Numbers

Ignition coil references: UF483, UF-483, 06C905115A, 06C905115B, 06C905115D, 06C905115E, 06C905115F, 06C905115G, 06C905115H, 06C905115K, 06C905115L, 06C905115M, 6C905115M, GN10444, 6739301, C591, 1788338.

Spark plug references: 7092, BKR6EGP.

UF483 Ignition Coil & 7092 Platinum Spark Plug Construction for Audi 3.0L V6

Ignition Coil Construction	Silicon steel core, high-temperature rubber, varnished copper wire
Spark Plug Construction	Platinum-tipped center electrode with ceramic insulator
Replacement Type	OE-style aftermarket ignition service components

UF483 / 7092 Service Scenarios for Audi A4/A6 3.0L V6

Rough Idle or Cylinder Misfire

Inspect the affected coil, spark plug, connector, wiring, boot area, and plug well before replacement. Oil, moisture, fuel-delivery faults, intake leaks, sensor issues, compression, timing, or other mechanical conditions can produce similar symptoms.

Hesitation Under Load

A marginal ignition component may become more noticeable during acceleration. Confirm the affected cylinder and component condition before replacement.

Complete Six-Cylinder Ignition Maintenance

The 6+6 package provides a matched-count service option when the exact listed Audi 3.0L V6 application and original components are confirmed.

How to Confirm UF483 and 7092 Fitment Before Ordering

Confirm the exact Audi model, year, and 3.0L V6 engine.
Compare UF483 and the listed 06C905115-series references with the original ignition coil.
Check connector shape and keying, coil body, mounting area, and boot profile.
Confirm 7092 / BKR6EGP against the removed spark plug or vehicle service information.

Installation Checks for the UF483 & 7092 Audi 6+6 Kit

Work on a cool engine and keep debris out of the plug wells.
Inspect wiring, connectors, boots, plug wells, oil, and moisture.
Compare every new component with the removed part before installation.
Use the exact vehicle service specification for spark plug gap and tightening torque.
Verify connector seating and recheck stored or returning misfire codes after service.

Important: 7092 / BKR6EGP is a platinum spark plug reference. These are BDFHYK OE-style aftermarket service components, not factory-branded Audi parts. Continue diagnosis if symptoms remain after ignition service.

Difficulty Moderate

Estimated Time 0.5–1 hour

Tools Required

Screwdrivers
Service manual specific to your vehicle
Socket set and ratchet
Wrenches

Pre-Installation Checklist

Stop the engine before disassembling or replacing the ignition coil.
Check the spark plugs and spark plug wires as part of diagnosis.
Keep the installation area clean and dry.
Make sure the ignition coil connections are correct.
Refer to the service manual for your specific vehicle because removal order and connector or fastener details can vary by make and model.
Disconnect the negative battery cable before working on the ignition system.

Installation Steps

Disconnect the battery. Remove the negative battery cable by loosening the clamp bolt with a socket or wrench.
Locate the ignition coils on top of the engine. They may be attached to the engine block or surrounding components.
Disconnect and remove the old ignition coil. Remove the mounting bolts or screws and disconnect the electrical connector(s). The order can vary by vehicle, so follow the vehicle-specific service manual. Remove the old coil once fully disconnected.
If one coil serves multiple spark plugs and has multiple electrical connections, mark or label the connectors so they can be reattached to the correct terminals.
Install the new ignition coil in the reverse order of removal. Secure the mounting bolts or screws and reconnect the electrical connector(s) in the correct positions.
Reconnect the negative battery terminal. Hand-tighten the connection, then tighten the terminal bolt with a socket or wrench. Do not over-tighten.
Close the hood, start the engine with the vehicle in Park, and confirm it starts and idles normally. If it does, test-drive the vehicle.

Post-Installation Verification

Confirm the new ignition coil is securely mounted.
Confirm all electrical connectors are connected to the correct terminals.
Confirm the negative battery terminal is reconnected and tightened sufficiently without over-tightening.
Start the engine in Park and confirm it starts and idles normally.
If idle is normal, test-drive the vehicle and check for remaining misfire or drivability symptoms.

Troubleshooting

Spark plug and wire checks from the manual:
With the engine running, disconnect spark plug wires one at a time and observe engine-speed or roughness changes; the manual states that no significant change can indicate a bad spark plug.
The manual describes checking for spark by holding the end of a disconnected spark plug wire near a metal surface and looking or listening for a spark or cracking sound.
While the engine is cranked, check for spark at each spark plug wire; the manual states that no spark can indicate a dead wire.
Make sure battery, ignition, coil, and spark-plug wire connections are secure. Wiggle connections and retest if a loose connection is suspected.
Keep spark plug ends clean and free of dirt, oil, or grease; clean and retest before replacing a plug.
Inspect wires for cracked, cut, scraped, or burned insulation. Check boots and terminals for damage, corrosion, or poor contact.
Check for corrosion between the boot, spark plug, and ignition coil, and inspect the spark plug for discoloration or damage.
Inspect spring clips and wire retention at the distributor and spark plug ends to make sure connections are held securely.
Ignition coil failure can cause one or more cylinders to misfire, stuttering, sluggishness, and other drivability issues.

BDFHYK Ignition Coil Installation Guide

Q: What is included in the UF483 and 7092 Audi 6+6 ignition kit?
A: The kit includes 6 UF483-style ignition coils and 6 7092 / BKR6EGP platinum spark plugs.

Q: Which Audi applications are listed for this UF483 / 7092 kit?
A: Listed applications are Audi A4 2002-2005, A4 Quattro 2002-2006, A6 2002-2004, and A6 Quattro 2002-2004 with the 3.0L V6 engine.

Q: Is the listed Audi engine a 3.0L V6?
A: Yes. Confirm the exact 3.0L V6 application and original ignition components before ordering.

Q: Is this a complete six-cylinder service quantity?
A: Yes. This package contains 6 ignition coils and 6 spark plugs for the listed six-cylinder applications when exact fitment is confirmed.

Q: Which UF483 coil references should be compared?
A: Compare UF483 and the listed 06C905115-series references with the original ignition coil or vehicle service information.

Q: Is 7092 / BKR6EGP an iridium or platinum spark plug?
A: 7092 / BKR6EGP is a platinum spark plug reference.

Q: Can weak ignition coils or worn spark plugs contribute to rough idle or a cylinder misfire?
A: Yes, but wiring, fuel delivery, intake leaks, sensors, compression, timing, and other mechanical conditions can produce similar symptoms.

Q: Should all six coils and spark plugs always be replaced together?
A: Not automatically. Diagnose first. A complete 6+6 set is useful when both component groups are due for six-cylinder service.

Q: What should be checked before installing UF483 coils and 7092 spark plugs?
A: Confirm exact model, year, 3.0L V6 engine, OE/reference number, connector keying, coil geometry, boot profile, spark plug reference, and use the exact vehicle service specification for gap and tightening torque.

Q: What if a misfire remains after ignition service?
A: Continue diagnosis of wiring, connectors, injectors, fuel pressure, intake leaks, sensors, compression, timing, and other mechanical conditions.

Q: Are these factory Audi parts?
A: No. These are BDFHYK OE-style aftermarket service components, not factory-branded Audi parts.

Returns & Refunds

We accept returns within 30 days of delivery for eligible items. If the product is unused and in original condition, you may request a return according to our refund policy. Full policy details: View Refund Policy . We recommend contacting our support team before initiating a return to ensure the fastest resolution.

Customer Support

If you purchased the wrong part, received an incompatible item, or need installation assistance, please contact us directly.

Email: service@bdfhyk.com

Business Hours:

Mon–Fri 9:00–18:00 (GMT+8)

Mon–Fri 19:00–04:00 (UTC−6 / CST)

Manufacturing Standards

Direct Factory Supply, Cost Saving
Integrated R&D, production, and warehousing. Eliminate middleman markups: same quality at lower prices, superior quality at same prices.

Precision Inspection, Commitment to Excellence
Rigorous inspection process, international certification standards. Each product includes individual inspection.