2003-2013 Chevrolet Silverado GMC Sierra HVAC Blower Motor Assembly Replacement for 89019320 BDFHYK

Works great

Installing this was a tiny bit cumbersome but pretty straightforward.

It fit perfectly into its slot and airflow has been very good after 4 months and constant usage in SoCal.

The one thing i did notice is that this does run a bit louder than the OEM one at low speeds. It has a slight drone at low speeds that you can hear throughout the cabin but does get drowned out if you crank it higher. Overall its not a dealbreaker and for the cost savings compared to the original, it was worth it. Have not had any issues since!

So far so good. Installed in a 1998 Toyota Sienna LE. Fits well. Electrical connector just like the original. Overall very well made.

Worked perfectly couldn't be more happier with it. Identical to the original as well as being extremely quiet on all speeds also blows quite strong compared to the original that was in my car.

This blower works fine! It was fairly easy to install in my 1994 GMC Sonoma. The fan is quite in its operation. Thanks!

Very loud, and not as strong as original, or the first replacement

This BDFHYK blower motor fan 700064 worked great in my 2001 Toyota Sienna (front). Price was so low I was concerned it might not actually include the fan cage, but it did indeed include it. Fits fine, runs fine, blows well.

Easy to install quiet motor blows hard great air flow

Works really good... nice product..Will defently buy again ..work goon on my 2016 toyota corrola..S

I installed this today on my Chevrolet Silverado 1500 , but after everything was finished I noticed it doesn't preform as well as the original fan did.. it is what it is for the price.

It looked and fit exactly like the factory blower in a 2012 Traverse and the performance seems identical. This a very good quality part at a big discount over OEM.

If anyone if looking for a blower motor for their Blazer, this is it.... It's a perfect fit, air flow is fast & steady, function like OMG. As far as installation, well that could be a process depending on how you try taking the old one out & putting this new one in. Blazers aren't always the easiest to work on. But I do recommend this product. It's the second one we've bought. One for 1997 & 2001 Blazers.

Took me longer to remove/reinstall the cover under the dash of my 2004 Tahoe than it did to replace this fan motor. Very happy with product.

I put this in myself, it's just 3 bolts and one wire harness that plugs right in. *You will have to remove a bracket holding up other wire harnesses that is a Phillips head screw, on a 2016 Corolla.

Installation was easy, it slides right in, and it's reasonably easy to reattach the bolts to hold it up. For me the hardest part was getting that bracket that was just in the way of one of the bolts, back up.

I tested it, and it definitely solved my problem. I would say it's as quiet or quieter than OEM. However it doesn't feel as powerful. I wanted to give it a fair assessment, so I also replaced my cabin air filter. It feels weaker than when my OEM part was working at full potential. But it's adequate.

I cannot speak to durability or how long it will last, as I just put it in a week ago. Though it seems to push less air, it has seen me through a couple of snow storms and I have no complaints. When I put on the air, it revs right up to speed and the air comes out as the desired temperature. I hear no clicking, stuttering or anything concerning.

I'd much rather pay for this $50 part, than have paid someone a couple hundred for a 20minute job.

Too early to tell so far so good though.

It works

Excellent product exact duplicate of original. Looks very high quality. Fits perfectly in my gmc will see how long it lasts.