Front Driveshaft Assembly for 2001-2007 Dodge Dakota Mitsubishi Raider 3.7L V6 4WD Automatic Replace 938-012 | BDFHYK

Dodge Dakota & Mitsubishi Raider Front Drive Shaft 938-012 FAQs

Q: Why does my Dakota or Raider vibrate more under acceleration?

A: Load-related vibration can involve the front driveshaft or its joints, but wheels and tires, hubs, axle components, mounts, differential and transfer-case components can create similar symptoms. Inspect the complete driveline before replacement.

Q: Can a clunk during acceleration or deceleration come from the front driveshaft?

A: Yes. Abnormal joint, spline or connection play can contribute to a clunk, but differential, axle, transfer-case and mount clearances can sound similar. Locate the play before replacing the shaft.

Q: Can a worn driveshaft joint bind before large free play develops?

A: Yes. A joint can become stiff, notchy or noisy before obvious looseness appears. Inspect articulation, seals, rust powder and rough movement according to the vehicle service procedure.

Q: Which Dodge Dakota 3.7L years are included in the structured fitment?

A: The conservative 3.7L V6 automatic fitment used here is 2004-2007 Dodge Dakota 4WD. Earlier Dakota years should not be assumed to use the same 3.7L automatic configuration.

Q: Which Mitsubishi Raider 3.7L years are included?

A: The structured fitment includes 2006-2007 Mitsubishi Raider 3.7L V6 4WD applications. Confirm the automatic transmission and original shaft.

Q: Why is the structured fitment narrower than the current Product Title?

A: The Product Title groups 2001-2007 under a 3.7L V6 automatic description, but verified application data shows the 3.7L configuration starts later. The structured field is intentionally narrowed to avoid publishing unsupported year/engine combinations.

Q: Which OE or interchange numbers should I compare?

A: Compare 938-012, 938012, 65-9514 and 52105981AC with the removed shaft or a reliable VIN-based parts catalog.

Q: Is this driveshaft for the front or rear?

A: This SKU is listed for the front driveshaft position on 4WD applications. Do not substitute a rear driveshaft or axle-shaft application.

Q: Does this automatically fit a lifted or leveled Dakota or Raider?

A: No. Suspension changes can alter driveshaft angles and required geometry. Modified vehicles require separate verification of operating angle, length and connection geometry.

Q: What transmission details should I verify?

A: Confirm the automatic-transmission configuration and compare the original shaft. Some 938-012 applications are cataloged around the 42RLE / 4-speed automatic configuration, while other years can use different driveshafts.

Q: What should I check before installing the replacement front driveshaft?

A: Compare the replacement with the removed shaft, including end connections, overall layout, spline configuration and any required orientation. Follow the vehicle service procedure and specified fastener tightening requirements.

Q: Is this a genuine Dodge, Mitsubishi or Mopar OEM driveshaft?

A: No. This is a BDFHYK aftermarket replacement driveshaft. OE and interchange references are provided only for application identification and fitment comparison.