Ford F-150 Expedition Super Duty HVAC Blower Motor 4-Pin 700329, Replace FL3Z19805A PM4102 | BDFHYK

$115.99

Product Detail

Type Blower Motor
SKU BDDLZ-BD-05-06163
OE Number PM4102, 75045, MM-1198, MM1198, 700329, FL3Z19805E, FL3Z19805A, FL3Z19805C

⛟ Estimated Delivery: Calculating... · Ships by Calculating... · Free Shipping

Trust & Assurance

Free Shipping · 2–7 Business Days

12-Month Warranty

30-Day Return

Secured Payment

Restore Reliable HVAC Airflow with a Direct Replacement Blower Motor

Restore proper airflow and climate control performance with this BDFHYK HVAC blower motor assembly. Designed as a direct replacement for select Ford F-Series trucks, Ford Expedition, and Lincoln Navigator applications, it helps address weak airflow, unusual blower noise, intermittent operation, or complete fan failure.

Vehicle Fitment & OE Replacement

Ford F-150
2015–2023 Ford F-150

Ford Expedition
2018–2024 Ford Expedition

Ford Super Duty
2017–2022 Ford F-250 / F-350 / F-450 / F-550

Lincoln Navigator
2018–2022 Lincoln Navigator

Connector: 4-Pin
Fitment Type: Direct Replacement

OE / Reference Numbers:
700329, PM4102, FL3Z19805A, FL3Z19805C, FL3Z19805E

Important Fitment Note

4-Pin Connector — Please verify your original connector before ordering.

Match the vehicle information, OE/reference number, and 4-pin electrical connector with your original blower motor to ensure proper compatibility.

Signs Your Blower Motor Needs Replacement

Weak Airflow
Airflow from the vents becomes weak even at the highest fan setting.

No Air From Vents
The blower motor stops working and no air is delivered.

Unusual Noise
Grinding, squealing, or rattling sounds may indicate a worn blower motor.

Intermittent Operation
The blower fan works inconsistently or suddenly stops.

Direct Replacement for Failed Blower Motors

Designed to match the original fit, form, and function of the factory blower motor without modifying factory mounting points or wiring.

OE-Style Fit
Designed to match the original mounting locations for straightforward installation.

Reliable HVAC Performance
Helps restore consistent airflow for the vehicle's heating and air conditioning system.

Blower Motor Installation Guide

Estimated Installation Time: 30–60 Minutes

Step 1: Disconnect Vehicle Battery
Disconnect the battery before installation.

Step 2: Access the Blower Motor
Remove the glove box or lower dash panel as required to access the blower motor.

Step 3: Verify the Connector
Before removing the original unit, confirm that the vehicle uses the matching 4-pin electrical connector.

Step 4: Remove the Old Blower Motor
Disconnect the electrical connector and remove the original blower motor.

Step 5: Install the Replacement
Install the replacement blower motor, reconnect the 4-pin connector, and reinstall the removed panels.

Returns & Refunds

We accept returns within 30 days of delivery for eligible items. If the product is unused and in original condition, you may request a return according to our refund policy. Full policy details: View Refund Policy . We recommend contacting our support team before initiating a return to ensure the fastest resolution.

Customer Support

If you purchased the wrong part, received an incompatible item, or need installation assistance, please contact us directly.

Email: service@bdfhyk.com

Business Hours:

Mon–Fri 9:00–18:00 (GMT+8)

Mon–Fri 19:00–04:00 (UTC−6 / CST)

Manufacturing Standards

Direct Factory Supply, Cost Saving
Integrated R&D, production, and warehousing. Eliminate middleman markups: same quality at lower prices, superior quality at same prices.

Precision Inspection, Commitment to Excellence
Rigorous inspection process, international certification standards. Each product includes individual inspection.

5 stars: 13 (76%)
4 stars: 2 (12%)
3 stars: 1 (6%)
2 stars: 0 (0%)
1 star: 1 (6%)

This product has no reviews of its own. The merchant grouped it with related products, so the reviews shown are from across that group.

Blower motor

Works great

Not as quiet as OEM but close!

Installing this was a tiny bit cumbersome but pretty straightforward.

It fit perfectly into its slot and airflow has been very good after 4 months and constant usage in SoCal.

The one thing i did notice is that this does run a bit louder than the OEM one at low speeds. It has a slight drone at low speeds that you can hear throughout the cabin but does get drowned out if you crank it higher. Overall its not a dealbreaker and for the cost savings compared to the original, it was worth it. Have not had any issues since!

VERY GOOD!!!

So far so good. Installed in a 1998 Toyota Sienna LE. Fits well. Electrical connector just like the original. Overall very well made.

Awesome

Worked perfectly couldn't be more happier with it. Identical to the original as well as being extremely quiet on all speeds also blows quite strong compared to the original that was in my car.

This blower works fine!

This blower works fine! It was fairly easy to install in my 1994 GMC Sonoma. The fan is quite in its operation. Thanks!

Loud

Very loud, and not as strong as original, or the first replacement

Great in 2001 Toyota Sienna

This BDFHYK blower motor fan 700064 worked great in my 2001 Toyota Sienna (front). Price was so low I was concerned it might not actually include the fan cage, but it did indeed include it. Fits fine, runs fine, blows well.

Same as OEM

Easy to install quiet motor blows hard great air flow

Make sure its the right one or you be having left over screws..

Works really good... nice product..Will defently buy again ..work goon on my 2016 toyota corrola..S

Doesn't blow like original fan

I installed this today on my Chevrolet Silverado 1500 , but after everything was finished I noticed it doesn't preform as well as the original fan did.. it is what it is for the price.

Fit and quality is identical to the OEM

It looked and fit exactly like the factory blower in a 2012 Traverse and the performance seems identical. This a very good quality part at a big discount over OEM.

Excellent air flow.

If anyone if looking for a blower motor for their Blazer, this is it.... It's a perfect fit, air flow is fast & steady, function like OMG. As far as installation, well that could be a process depending on how you try taking the old one out & putting this new one in. Blazers aren't always the easiest to work on. But I do recommend this product. It's the second one we've bought. One for 1997 & 2001 Blazers.

Easy to install

Took me longer to remove/reinstall the cover under the dash of my 2004 Tahoe than it did to replace this fan motor. Very happy with product.

Fits 2016 Corolla LE

I put this in myself, it's just 3 bolts and one wire harness that plugs right in. *You will have to remove a bracket holding up other wire harnesses that is a Phillips head screw, on a 2016 Corolla.

Installation was easy, it slides right in, and it's reasonably easy to reattach the bolts to hold it up. For me the hardest part was getting that bracket that was just in the way of one of the bolts, back up.

I tested it, and it definitely solved my problem. I would say it's as quiet or quieter than OEM. However it doesn't feel as powerful. I wanted to give it a fair assessment, so I also replaced my cabin air filter. It feels weaker than when my OEM part was working at full potential. But it's adequate.

I cannot speak to durability or how long it will last, as I just put it in a week ago. Though it seems to push less air, it has seen me through a couple of snow storms and I have no complaints. When I put on the air, it revs right up to speed and the air comes out as the desired temperature. I hear no clicking, stuttering or anything concerning.

I'd much rather pay for this $50 part, than have paid someone a couple hundred for a 20minute job.

Perfect fit

Too early to tell so far so good though.

Works

It works

Excellent

Excellent product exact duplicate of original. Looks very high quality. Fits perfectly in my gmc will see how long it lasts.