BDFHYK E2272S fuel pump sender for Crown Victoria Town Car Grand Marquis

E2272S in-tank electric pump sender float and strainer assembly

E2272S electrical connector fuel ports hanger and flange details

E2272S fuel-level sender float arm and strainer construction

E2272S 1998–2000 Ford Lincoln Mercury 4.6L fitment reference

E2272S XW1Z-9H307-AG OE interchange and hanger dimensions

Ford Crown Victoria Lincoln Town Car Mercury Grand Marquis Fuel Pump Module Assembly 1998-2000 4.6L V8 Replacement E2272S BDFHYK

$55.69

Product Detail

Type Fuel Pump Assembly
SKU BDDLZ-BD-05-10504-FP
Make
- Ford
- Lincoln
- Mercury
OE Number F8AZ9H307AC,XW1Z9H307AB,XW1Z9H307AF,XW1Z9H307AG,E2272S

Trust & Assurance

Free Shipping · 3–7 Business Days

12-Month Warranty

30-Day Return

Secured Payment

Technical Specifications

Part Number	E2272S
Product Type	In-Tank Fuel Pump and Sender Assembly
Installation Location	Inside the fuel tank
Fuel Type	Gasoline
Application	1998–2000 Ford Crown Victoria, Lincoln Town Car and Mercury Grand Marquis
Engine Coverage	4.6L V8
Configuration Check	Verify sedan, police, fleet, limousine, wheelbase and fuel-tank layout
Assembly Functions	Fuel delivery and fuel-level reporting
Fuel Level Sender	Included
Float Arm	Included
Strainer	Included
Fuel Ports	Quick-connect arrangement; compare quantity, diameter and orientation
Electrical Connector	Interchange-specific; compare terminal count, keying and locking tab
Fuel Pressure Sensor	Not included in the verified application
Hanger and Flange	Tank-depth-specific metal hanger and mounting flange
OE References	E2272S, SP2272H, P74868S, F8AZ-9H307-AC, XW1Z-9H307-AB, XW1Z-9H307-AF, XW1Z-9H307-AG
Fitment Priority	Model, body/fleet configuration, tank, OE number, connector and hanger layout
Installation Note	Clean the tank, use a new seal and reconnect each fuel port correctly
Diagnostic Note	Test pressure, voltage, ground, fuse, relay, wiring, lines and sender circuit

Extended cranking, low measured fuel pressure, hesitation under load, intermittent stalling, or an inaccurate fuel gauge can indicate an in-tank pump-and-sender fault after the fuse, relay, power supply, ground, wiring, and fuel lines have been tested. This E2272S replacement assembly is intended for specified 1998–2000 Ford Crown Victoria, Lincoln Town Car, and Mercury Grand Marquis 4.6L gasoline applications. Confirm the exact model, body or fleet configuration, OE number, connector, fuel-port layout, flange, hanger depth, and float-arm geometry before ordering.

Fuel Pump and Sender Fitment for 1998–2000 Panther Models

This in-tank fuel pump and sender assembly is organized for specified 4.6L V8 sedan applications. Police, fleet, limousine, long-wheelbase, and other tank configurations can use different connectors, hangers, ports, or sender ranges, so vehicle name and model year alone are not sufficient.

Fitment Verification

Confirm the 1998–2000 model year, 4.6L V8 gasoline engine, body style, and fleet or limousine configuration.
Match E2272S, SP2272H, P74868S, F8AZ-9H307-AC, XW1Z-9H307-AB/AF/AG, or the verified original number.
Compare the electrical connector, quick-connect fuel ports, metal hanger, flange, strainer position, and float arm.
Do not substitute an assembly for a different tank depth, connector, port layout, sender calibration, or pressure-sensor provision.

Assembly Functions and Included Components

Electric in-tank pump supplies fuel to the engine-side delivery system.
Fuel-level sender, float arm, and inlet strainer support fuel delivery and gauge reporting.
Fuel-port and connector details vary among interchange suppliers and must match the removed assembly.
The verified application does not use an included fuel-pressure sensor.

Symptoms and Diagnostic Checks

Measure fuel pressure before replacement. Test voltage and ground under load, inspect the fuse and relay, and check the connector, fuel lines, and sender circuit. A restricted strainer, tank contamination, damaged gauge wiring, EVAP fault, or engine-management problem can create similar symptoms.

Installation Notes

Relieve fuel-system pressure, disconnect the battery, and support the tank safely. Clean the tank and flange, install a new compatible seal, position the float and strainer correctly, and connect every fuel line without forcing it. Prime the system, inspect for leaks, measure pressure, and verify normal gauge operation.

What’s Included in This Fuel Pump Assembly

Complete fuel pump module
Integrated fuel level sending unit
Fuel strainer (filter sock)
Housing and mounting components

This fuel pump assembly is designed as a direct replacement unit that restores proper fuel delivery and fuel level monitoring.

Estimated Installation Time

Professional mechanic: 1–2 hours
DIY installation: 2–4 hours

Fuel pump replacement usually requires accessing the fuel tank or service panel depending on the vehicle design. Always disconnect the battery and relieve fuel system pressure before installation.

Pump Only vs Fuel Pump Assembly

Option	Description
Replace Pump Only	Lower parts cost but requires disassembling the existing module and reusing older components.
Replace Complete Assembly	A complete module designed for direct installation, helping restore reliable fuel delivery more efficiently.

Most modern vehicles use integrated fuel pump modules, which makes replacing the full assembly the more reliable solution.

Q: Which vehicles use the E2272S assembly?

A: It covers specified 1998–2000 Crown Victoria, Town Car, and Grand Marquis gasoline vehicles with the 4.6L V8.

Q: Does it fit every police, fleet, or limousine model?

A: Do not assume compatibility. Confirm the body, wheelbase, tank, OE number, connector, ports, and hanger depth.

Q: Is the fuel-level sender included?

A: Yes. The assembly includes the sender and float arm.

Q: Is the inlet strainer included?

A: Yes. The verified assembly configuration includes a fuel-pump strainer.

Q: Is a fuel-pressure sensor included?

A: No. The verified E2272S application is listed without a pressure sensor.

Q: Why must the connector and ports be compared?

A: Interchange assemblies can differ in terminal count, connector keying, port quantity, and port orientation.

Q: Which OE references can help identify the assembly?

A: Common references include F8AZ-9H307-AC and XW1Z-9H307-AB, -AF, or -AG.

Q: What symptoms can indicate assembly failure?

A: Low measured pressure, long cranking, hesitation, stalling, and inaccurate gauge readings can indicate a fault after circuit checks.

Q: What should be tested before replacement?

A: Test voltage and ground under load, fuse and relay operation, pressure, connector condition, fuel lines, and sender continuity.

Q: What checks are required after installation?

A: Prime the system, inspect the flange and fuel ports for leaks, measure pressure, and confirm normal gauge operation.

Returns & Refunds

We accept returns within 30 days of delivery for eligible items. If the product is unused and in original condition, you may request a return according to our refund policy. Full policy details: View Refund Policy . We recommend contacting our support team before initiating a return to ensure the fastest resolution.

Customer Support

If you purchased the wrong part, received an incompatible item, or need installation assistance, please contact us directly.

Email: service@bdfhyk.com

Business Hours:

Mon–Fri 9:00–18:00 (GMT+8)

Mon–Fri 19:00–04:00 (UTC−6 / CST)

Manufacturing Standards

Direct Factory Supply, Cost Saving
Integrated R&D, production, and warehousing. Eliminate middleman markups: same quality at lower prices, superior quality at same prices.

Precision Inspection, Commitment to Excellence
Rigorous inspection process, international certification standards. Each product includes individual inspection.