E2476M Electric Fuel Pump Replacement For Expedition 2005-2008 (5.4L V8); For Lincoln Navigator 2007-2008 (5.4L V8)

E2476M Fuel Pump Module for 2007–2008 Ford Expedition and Lincoln Navigator

Extended cranking, intermittent no-start, pressure loss under load, hesitation, stalling, or an inaccurate fuel-gauge reading can involve the in-tank module. This BDFHYK E2476M electric fuel pump module assembly is an aftermarket replacement for listed 2007–2008 Ford Expedition and Lincoln Navigator 5.4L V8 applications. Confirm E2476M or the matching OE number, fuel-tank configuration, connector, module depth, sender, and float arm before installation.

Confirm E2476M Expedition and Navigator Fitment

2007–2008 Ford Expedition 5.4L V8

The verified application range used for this module is 2007–2008 Ford Expedition with the 5.4L V8 engine. Do not rely on the broader year range in the current product title without matching the original module or VIN-based catalog data.

2007–2008 Lincoln Navigator 5.4L V8

The listed Lincoln application is 2007–2008 Navigator with the 5.4L V8 engine. Confirm tank size, tank design, connector, flange, line connections, module height, pickup, and sender arrangement.

E2476M and 7L1Z-9H307-B Cross-Reference

Listed OE and Interchange Numbers

E2476M, P76657M, SP2131M, FG0879, 7L1Z-9H307-B, 8L1Z-9H307-A, 8L1Z-9H307-B, 525-2650, PFS-369, PFS-420, PFS-514, EB476M, P76657BC-0101, 150273, TU288, 247GE, and 69374.

Use the Number With a Physical Module Comparison

Cross-reference numbers must be checked with the actual fuel tank and removed assembly. Compare the connector, line fittings, flange, module depth, reservoir and pickup arrangement, strainer direction, sender, and float-arm sweep.

Check the Expedition or Navigator Fuel System First

Confirm Pressure and Electrical Supply

• Measure fuel pressure during key-on, cranking, idle, and load
• Check the relay, fuse, wiring, ground, connector, and control command
• Inspect the fuel filter, lines, tank venting, pressure-control components, and injectors
• Test the sender and gauge circuit separately when the level reading is incorrect

Inspect the Tank for Contamination

Rust, sediment, water, degraded fuel, and debris can damage the replacement pump or restrict the pickup. Clean the tank and correct the contamination source before installing E2476M.

Expedition and Navigator Installation Notes

Prepare the Tank Opening and Seal

Relieve fuel pressure, disconnect the battery, support the vehicle and tank correctly, and clean the top of the tank before removal. Use a seal that matches the tank opening and confirm full lock-ring engagement.

Check Module Depth and Float-Arm Travel

Compare the old and new modules side by side. Verify connector indexing, line connections, flange shape, overall height, pickup position, strainer, sender, and float-arm movement. After installation, prime the system, verify pressure, inspect for leaks, and confirm gauge operation.

Before Ordering the E2476M Fuel Pump Assembly

5.4L SUV Module Checklist

• Confirm a 2007–2008 Expedition or Navigator 5.4L V8 application
• Match E2476M or the applicable OE/interchange number
• Verify tank size, tank opening, and module depth
• Compare the connector and fuel-line fittings
• Compare the pickup, sender, and float-arm layout
• Confirm seals, lock rings, and hardware shown with the product

This is a BDFHYK aftermarket replacement fuel pump module assembly, not a Ford or Lincoln factory OEM component.