BDFHYK E3726M fuel pump module for Cobalt, G4, G5, Pursuit, and Saturn Ion

E3726M in-tank fuel pump module with sender, float arm, and strainer

E3726M fuel pump module connector and fuel line fitting details

E3726M electric fuel pump module construction and component details

E3726M fuel pump module installation and fuel system reference

E3726M fuel pump module fitment and interchange reference

E3726M Electric Fuel Pump Module Assembly For 2006-2008 Chevrolet Cobalt/2007-2008 Pontiac G5/2006-2007 Saturn

$53.49

Product Detail

Type Fuel Pump Assembly
SKU BDDLZ-BD-05-10506-FP
Make
- Chevrolet
- Pontiac
- Saturn
OE Number E3726M,P76252M,67561,19168894,19152750,P76252M,E3726M,SP6015M,M100001,M100002,FG0915

Trust & Assurance

Free Shipping · 3–7 Business Days

12-Month Warranty

30-Day Return

Secured Payment

Technical Specifications

Brand	BDFHYK
SKU	BDDLZ-BD-05-10506-FP
Reference Part Number	E3726M
Product Type	Electric Fuel Pump Module Assembly
Installation Type	In-tank fuel pump module
Application	Specific 2006–2008 Chevrolet Cobalt and Pontiac G4/G5/Pursuit plus 2006–2007 Saturn Ion gasoline applications
Engine Coverage	2.0L, 2.2L, and 2.4L L4 engines in the listed model-year configurations
Emissions Note	Confirm PZEV and emissions-specific module configuration, especially on applicable 2.2L models
OE / Interchange References	E3726M; P76252M; SP6015M; SP6618M; FG0915; F2737A; 530-2269; 67561; 150286; 19152750; 19152752; 19168894; 19257126; 19257138; 88967309; 88967310; 88967312; 19332411
Module Functions	Electric fuel delivery, in-tank reservoir and pickup, strainer, and float-arm fuel-level sender arrangement
Pressure-Sensor Note	Comparable P76252M configuration does not include a fuel-tank pressure sensor
Fuel Type	Gasoline applications listed for the original vehicle system
Fitment Verification	Confirm model, year, engine, VIN, emissions label, tank design, connector, fittings, module height, sender, float arm, and OE number
Included Components	Fuel pump module assembly; comparable configurations include sender, strainer, seal, and wiring harness—confirm actual package contents
Lock Ring	Normally not included in comparable reference configurations
Installation Position	Inside the vehicle fuel tank
Symptoms to Check	Hard starting, no-start, low pressure, hesitation, stalling, power loss, abnormal pump operation, or inaccurate gauge reading
Related Parts to Check	Relay, fuse, wiring, ground, connector, filter, tank contamination, lines, injectors, control command, and gauge circuit
Installation Note	Relieve pressure, disconnect the battery, clean and support the tank, compare modules, use the correct seal, then prime, pressure-test, and leak-check
Part Classification	Vehicle-specific aftermarket replacement fuel pump module assembly
Replacement Part Note	BDFHYK aftermarket replacement; not a factory OEM component

E3726M Fuel Pump Module for Chevrolet Cobalt, Pontiac G4/G5/Pursuit, and Saturn Ion

Extended cranking, intermittent no-start, low fuel pressure, hesitation under load, stalling, abnormal pump operation, or an inaccurate fuel-gauge reading can involve the in-tank module. This BDFHYK E3726M electric fuel pump module assembly is an aftermarket replacement for specific 2006–2008 compact GM gasoline applications. Confirm the exact model year, engine, emissions specification, tank design, connector, module height, sender layout, and OE number before installation.

Confirm E3726M Vehicle and Engine Fitment

2006–2008 Chevrolet Cobalt with the 2.0L, 2.2L, or 2.4L L4 engine in listed configurations
2006 Pontiac G4 with the 2.2L or 2.4L L4 engine
2006 Pontiac Pursuit with the 2.2L or 2.4L L4 engine
2007–2008 Pontiac G5 with the 2.2L or 2.4L L4 engine in listed configurations
2006–2007 Saturn Ion with the 2.0L, 2.2L, or 2.4L L4 engine

Some 2.2L applications have PZEV or emissions-specific module differences. Verify the emissions label, VIN, original module, and OE number instead of relying only on year and engine size.

E3726M OE and Interchange Number Check

Listed references include E3726M, P76252M, SP6015M, SP6618M, FG0915, F2737A, 530-2269, 67561, 150286, 19152750, 19152752, 19168894, 19257126, 19257138, 88967309, 88967310, 88967312, and 19332411.

Comparable P76252M specifications include the fuel-level sender, strainer, seal, and wiring harness, but do not include a fuel-tank pressure sensor or lock ring. Confirm the actual package contents and compare the connector, flange, line fittings, reservoir, module height, sender, and float arm.

Check the Fuel System Before Replacing E3726M

Measure fuel pressure during key-on, cranking, idle, and load
Check available voltage and ground at the module under pump load
Inspect the relay, fuse, wiring, connector, filter, lines, and injectors
Test the sender and gauge circuit separately when the fuel-level reading is inaccurate

Clean rust, sediment, water, degraded fuel, and debris from the tank before installing the replacement module.

E3726M Installation Notes

Relieve fuel pressure, disconnect the battery, support and clean the tank, and compare the assemblies. Use the correct seal and confirm lock-ring engagement. After installation, prime the system, verify fuel pressure, inspect for leaks, confirm gauge operation, and recheck the electrical circuit.

Before Ordering the E3726M Fuel Pump Assembly

Confirm the exact Cobalt, G4, G5, Pursuit, or Ion year and engine
Verify PZEV or emissions-specific configuration where applicable
Match E3726M or the applicable OE/interchange number
Compare the tank opening, connector, line fittings, module height, sender, and float arm
Confirm the seal, wiring harness, lock ring, and package contents shown with the product

This is a BDFHYK aftermarket replacement fuel pump module assembly, not a Chevrolet, Pontiac, Saturn, or GM factory OEM component.

What’s Included in This Fuel Pump Assembly

Complete fuel pump module
Integrated fuel level sending unit
Fuel strainer (filter sock)
Housing and mounting components

This fuel pump assembly is designed as a direct replacement unit that restores proper fuel delivery and fuel level monitoring.

Estimated Installation Time

Professional mechanic: 1–2 hours
DIY installation: 2–4 hours

Fuel pump replacement usually requires accessing the fuel tank or service panel depending on the vehicle design. Always disconnect the battery and relieve fuel system pressure before installation.

Pump Only vs Fuel Pump Assembly

Option	Description
Replace Pump Only	Lower parts cost but requires disassembling the existing module and reusing older components.
Replace Complete Assembly	A complete module designed for direct installation, helping restore reliable fuel delivery more efficiently.

Most modern vehicles use integrated fuel pump modules, which makes replacing the full assembly the more reliable solution.

Q: Does E3726M fit every 2006–2008 Cobalt?

A: No. The exact engine, emissions specification, tank design, connector, module height, sender layout, and OE number must match.

Q: Which Cobalt engines are listed?

A: The listed range includes 2006–2008 Cobalt 2.0L, 2.2L, and 2.4L L4 configurations, subject to emissions and module verification.

Q: Which Pontiac models are listed?

A: The listed applications include 2006 Pontiac G4 and Pursuit plus 2007–2008 Pontiac G5 models with applicable 2.2L or 2.4L engines.

Q: Which Saturn Ion applications are listed?

A: The listed range is 2006–2007 Saturn Ion with the 2.0L, 2.2L, or 2.4L L4 engine.

Q: Why must PZEV or emissions configuration be checked?

A: Emissions-specific vehicles can use a different module, connector, or tank arrangement even when the year and engine size are the same.

Q: Can E3726M replace P76252M or FG0915?

A: Those numbers are listed as cross-references, but the tank, connector, fittings, module height, sender, float arm, and emissions configuration must also match.

Q: Is a fuel-tank pressure sensor included?

A: Comparable P76252M configurations do not include a tank-pressure sensor. Compare the original module and confirm the supplied package.

Q: Will replacing E3726M correct hesitation or stalling?

A: Only when testing confirms insufficient fuel pressure, inadequate pump output, or an internal module fault. Other electrical, ignition, air, or injector faults can cause similar symptoms.

Q: What should be inspected inside the tank?

A: Inspect for rust, sediment, water, degraded fuel, debris, damaged baffles, and pickup restrictions before installation.

Q: What should be checked after installation?

A: Prime the system, verify pressure, inspect the seal and connections for leaks, confirm gauge operation, and recheck the electrical circuit.

Returns & Refunds

We accept returns within 30 days of delivery for eligible items. If the product is unused and in original condition, you may request a return according to our refund policy. Full policy details: View Refund Policy . We recommend contacting our support team before initiating a return to ensure the fastest resolution.

Customer Support

If you purchased the wrong part, received an incompatible item, or need installation assistance, please contact us directly.

Email: service@bdfhyk.com

Business Hours:

Mon–Fri 9:00–18:00 (GMT+8)

Mon–Fri 19:00–04:00 (UTC−6 / CST)

Manufacturing Standards

Direct Factory Supply, Cost Saving
Integrated R&D, production, and warehousing. Eliminate middleman markups: same quality at lower prices, superior quality at same prices.

Precision Inspection, Commitment to Excellence
Rigorous inspection process, international certification standards. Each product includes individual inspection.