BDFHYK 47-1019 fuel pump module for 2008–2010 Polaris RZR 800
47-1019 complete RZR EFI pump sender reservoir and strainer assembly
47-1019 bolt-in flange single outlet and connector details
47-1019 RZR 800 RZR S 800 and RZR 4 800 fitment reference
47-1019 OE 2521011 module dimensions and component reference
BDFHYK 47-1019 fuel pump module for 2008–2010 Polaris RZR 800
47-1019 complete RZR EFI pump sender reservoir and strainer assembly
47-1019 bolt-in flange single outlet and connector details
47-1019 RZR 800 RZR S 800 and RZR 4 800 fitment reference
47-1019 OE 2521011 module dimensions and component reference

Electric Fuel Pump Module Assembly For Polaris RZR 4 800 2008-2010; Polaris RZR 800 2008-2010

$54.89
Product Detail
  • Type Fuel Pump Assembly
  • SKU BDDLZ-BD-05-7317
  • OE Number 47-1019,1009-0110,237471019,983207,24-71019
🚚 Estimated Delivery: Calculating... · Ships by Calculating... · Free Shipping
Trust & Assurance
Free Shipping · 2–7 Business Days
12-Month Warranty
30-Day Return
Secured Payment American Express Diners Club Discover JCB Maestro Mastercard PayPal Visa Pay
Description Specifications FAQs Return & Support

Hard starting, low measured fuel pressure, loss of power on acceleration, intermittent stalling, or a faulty fuel-level reading can indicate an in-tank module problem after the pump circuit, relay, tank vent, and fuel condition have been tested. This 47-1019 replacement module is intended for specified Polaris RZR 800 platforms. Confirm the exact RZR model, model year, build configuration, OE number, bolt-in tank flange, connector, outlet, module height, and float-arm layout before ordering.

47-1019 Fitment for Polaris RZR 800 Models

Verified core applications include 2008–2010 RZR 800, 2009–2010 RZR S 800, and 2010 RZR 4 800 configurations. Trim and production-date notes can apply within 2010, and the tank mounting design must match the removed module.

Fitment Verification

  • Confirm RZR 800, RZR S 800, or RZR 4 800 model and exact year.
  • Match 47-1019 or OE 2521011 and compare any superseded number.
  • Verify the bolt-in flange style; a tank using a different large retaining-nut module requires another part.
  • Compare the connector, single outlet, mounting holes, full module height, and float-arm direction.

Module Functions and Included Components

  • Complete tank-mounted EFI fuel pump module supports fuel delivery and level reporting.
  • Integrated pump, reservoir, strainer, sender, and float are configured as one assembly.
  • Single-outlet fuel connection and bolt-in flange must match the original tank.
  • Use a new compatible gasket or seal during installation.

Symptoms and Diagnostic Checks

Test pressure, voltage, ground, relay operation, and connector condition before replacement. Inspect the tank vent, fuel quality, internal hose, and fuel line for restriction. Dirt, water, stale fuel, a restricted vent, damaged wiring, or injector and engine-control faults can produce similar symptoms.

Installation Notes

Disconnect the battery and work away from flames, sparks, and hot surfaces. Relieve pressure, reduce the fuel level, clean the tank opening, and remove the flange hardware evenly. Install a new compatible seal, position the float without interference, tighten the flange evenly, and prime the module. Check for leaks, verify pressure, and confirm gauge response before operation.