Electric Fuel Pump Module Assembly For Expedition V8 4.6L 2003-2004 Engine 4.6L/V8

Extended cranking, a no-start condition, stalling, weak acceleration, low fuel pressure, an inaccurate fuel gauge, or an EVAP fault can indicate an in-tank module problem after electrical and pressure tests are completed. The BDFHYK E2361M fuel pump module is an OE-style replacement for specified 2003–2004 Ford Expedition models with the 4.6L V8. Confirm the two-outlet arrangement, vapor-sensor configuration, flange, connector, module depth, float arm, and OE number before installation.

E2361M Fitment for 2003–2004 Expedition 4.6L

• 2003 Ford Expedition, 4.6L V8, specified E2361M configuration
• 2004 Ford Expedition, 4.6L V8, specified E2361M configuration
• 5.4L and different tank/module configurations are not assumed

Fitment must be confirmed from the VIN, fuel-tank configuration, removed module, and OE/interchange number. Similar vehicles can use different flanges, connectors, fuel-line arrangements, module depths, or sender layouts.

What the E2361M Assembly Does

Supplies fuel from the tank and measures fuel level through the module sender. This is an OE-style aftermarket replacement intended to restore the original tank-side function when the application and physical module match.

Fitment Verification Before Installation

• 4.6L V8 engine
• Two fuel-outlet configuration
• Flange and electrical connector
• Module height and reservoir shape
• Float arm and sender layout
• Original vapor sensor and E2361M/OE number

Diagnosis Before Replacing the Fuel Module

• Measure fuel pressure and residual pressure.
• Check fuse, relay/control circuit, inertia switch, power, ground, and voltage drop.
• Inspect the vapor-sensor circuit and connector condition.
• Separate fuel-gauge and EVAP faults from pump-pressure faults.

A failed fuel pump module should be confirmed with pressure, voltage, ground, and circuit testing. Do not replace the module solely because the engine does not start or the fuel gauge is inaccurate.

Installation and Post-Installation Checks

Relieve pressure, disconnect the battery, transfer the original vapor sensor when required, replace the seal, prime, and verify leaks, pressure, gauge, and EVAP operation. Do not energize an electric fuel pump outside fuel. Follow the vehicle service procedure for tank removal, sealing, and pressure testing.

Application Summary

E2361M is for specified 2003–2004 Expedition 4.6L applications; 5.4L and different tank/module configurations require separate verification. Compare all pictured components and listed references with the removed assembly before ordering or installation.