Fuel Pump Assembly E2363M Compatible with Ford Ranger & Mazda B2300 L4 2.3L, V6 3.0L 4.0L, 2004-2006

Extended cranking, low measured fuel pressure, hesitation under load, intermittent stalling, or an inaccurate fuel gauge can indicate an in-tank module fault after the fuse, relay, power supply, ground, wiring, and fuel lines have been tested. This E2363M replacement module is intended for specified 2004–2006 Ford Ranger and Mazda B2300, B3000, or B4000 gasoline trucks using the matching approximately 125.7- or 125.9-inch wheelbase configuration. Confirm the model, engine, build date, wheelbase, OE number, four-terminal connector, single fuel outlet, flange, module height, and float-arm layout before ordering.

Fuel Pump Module Fitment for Ranger and Mazda B-Series Trucks

Verified applications include selected Ranger 2.3L, 3.0L, and 4.0L configurations and matching Mazda B-Series engine applications. Some 2006 Mazda applications are limited to production through approximately May 1, 2006. Trucks with a different wheelbase, tank depth, connector, outlet, or sender calibration require another module.

Fitment Verification

• Confirm the exact Ranger, B2300, B3000, or B4000 model, year, gasoline engine, and wheelbase.
• Verify an applicable approximately 125.7- or 125.9-inch wheelbase configuration.
• For selected 2006 Mazda applications, check the production date against the approximately May 1, 2006 cutoff.
• Match E2363M, FG0882, SP2006M, P76131M, 4L5Z-9H307-CF, 5L5Z-9H307-CA, or a verified 6L5Z reference.

Module Functions and Included Components

• Electric in-tank pump supplies fuel to the engine-side delivery system.
• Fuel-level sender, float arm, reservoir, and inlet strainer support pickup and gauge reporting.
• A tank seal and lock ring are included in the verified E2363M configuration.
• The module uses a four-terminal connector and one 3/8-inch quick-connect outlet; a fuel-tank pressure sensor and wire harness are not included.

Symptoms and Diagnostic Checks

Measure fuel pressure before replacing the module. Test voltage and ground under load, inspect the fuse and relay, and check the connector, outlet, and sender circuit. An incorrect wheelbase or production-date application, tank contamination, damaged wiring, restricted line, or engine-management fault can create similar symptoms.

Installation Notes

Relieve fuel-system pressure, disconnect the battery, and support the tank safely. Clean the tank and sealing surface, install the supplied compatible seal and lock ring, keep the float arm clear, and secure the module evenly. Prime the system, inspect the flange and outlet for leaks, measure fuel pressure, and confirm normal gauge operation.