BDFHYK E2364S fuel pump hanger for 2004–2008 Ford E-Series 35-gallon tank

E2364S metal hanger pump sender float and strainer assembly

E2364S three-tube fuel ports connector and flange details

E2364S E-150 E-250 E-350 E-450 midship tank fitment reference

E2364S SP2092H OE interchange and hanger dimensions

Electric Fuel Pump Replacement For E-150/E-150 Club Wagon/E-250/E-350 Club Wagon/E-350 Super Duty/E-450 Super Duty

$55.89

Product Detail

Type Fuel Pump Assembly
SKU BDDLZ-BD-05-10447
Make
- Ford
OE Number 150150, 1AMFP00070, E2364S, EFP2377, FE0441, F1375A, PFS304, P76229, P76551H, SP2092H

Trust & Assurance

Free Shipping · 3–7 Business Days

12-Month Warranty

30-Day Return

Secured Payment

Technical Specifications

Part Number	E2364S
Product Type	In-Tank Fuel Pump Hanger and Sender Assembly
Installation Location	Inside the midship fuel tank
Fuel Type	Gasoline
Application	Selected 2004–2008 Ford E-150, E-250, E-350 and E-450 configurations
Engine Coverage	Selected 4.6L V8, 5.4L V8 and 6.8L V10 gasoline applications
Fuel Tank Position	Midship tank
Fuel Tank Capacity	35 gallons
Hanger Configuration	Metal flange and tank-depth-specific hanger
Module Functions	Fuel delivery, pump support and fuel-level reporting
Fuel Level Sender	Included
Float Arm and Strainer	Included
Fuel Ports	Three-tube arrangement with auxiliary or secondary fuel connection
Electrical Connector	Vehicle-specific; compare terminal layout and keying
OE References	E2364S, SP2092H, P76229, P76551H, F1375A, PFS304, FE0441
Fitment Priority	Chassis, year, engine, midship 35-gallon tank, OE number and hanger layout
Not Compatible With	Diesel, rear tank, different capacity, port arrangement, connector or hanger length
Installation Note	Use a new seal and connect all three fuel tubes in the original positions
Diagnostic Note	Test pressure, voltage, ground, fuse, relay, wiring, sender circuit and external lines

Extended cranking, low measured fuel pressure, hesitation under load, intermittent stalling, or an inaccurate fuel gauge can indicate a pump-and-sender hanger fault after the fuse, relay, power supply, ground, wiring, and fuel lines have been tested. This E2364S replacement hanger is intended for specified 2004–2008 Ford E-Series gasoline vans and cutaway chassis using the midship 35-gallon fuel tank. Confirm the exact chassis, engine, tank position and capacity, OE number, three-tube fuel-port layout, auxiliary fuel connection, flange, connector, hanger length, and float-arm geometry before ordering.

E2364S Ford E-Series Midship 35-Gallon Tank Fitment

Verified coverage includes specified 2004–2008 E-150, E-250, E-350, and E-450 gasoline applications equipped with the matching midship 35-gallon tank. Similar E-Series vehicles can use a rear tank, another capacity, a different hanger length, or a different fuel-port arrangement.

Fitment Verification

Confirm the exact E-Series model, body or cutaway chassis, model year, and gasoline engine.
Verify a midship 35-gallon tank rather than a rear-mounted or different-capacity tank.
Match E2364S, SP2092H, P76229, P76551H, or another verified interchange to the removed hanger.
Compare the metal flange, three-tube layout, auxiliary fuel port, connector, hanger length, strainer position, and float arm.

Hanger Functions and Included Components

Metal tank hanger supports the electric in-tank pump and fuel-level sender.
Fuel-level sender, float arm, and inlet strainer are configured for the specified tank depth.
Three fuel tubes and the secondary or auxiliary fuel connection must match the original assembly.
This hanger does not replace the fuel-pump relay, external lines, or other chassis-specific fuel-system components.

Symptoms and Diagnostic Checks

Measure fuel pressure before removing the tank. Test voltage and ground at the hanger under load, inspect the fuse and relay, and check all fuel lines and connector terminals. Rust, debris, a restricted strainer, an incorrect tank module, sender-circuit damage, or an external line problem can create similar symptoms.

Installation Notes

Relieve fuel-system pressure, disconnect the battery, and support the tank safely. Clean the tank and flange, install a new compatible seal, position the strainer and float correctly, and connect all three fuel tubes without forcing them. Secure the flange evenly, prime the system, inspect for leaks, measure pressure, and verify normal gauge operation.

What’s Included in This Fuel Pump Assembly

Complete fuel pump module
Integrated fuel level sending unit
Fuel strainer (filter sock)
Housing and mounting components

This fuel pump assembly is designed as a direct replacement unit that restores proper fuel delivery and fuel level monitoring.

Estimated Installation Time

Professional mechanic: 1–2 hours
DIY installation: 2–4 hours

Fuel pump replacement usually requires accessing the fuel tank or service panel depending on the vehicle design. Always disconnect the battery and relieve fuel system pressure before installation.

Pump Only vs Fuel Pump Assembly

Option	Description
Replace Pump Only	Lower parts cost but requires disassembling the existing module and reusing older components.
Replace Complete Assembly	A complete module designed for direct installation, helping restore reliable fuel delivery more efficiently.

Most modern vehicles use integrated fuel pump modules, which makes replacing the full assembly the more reliable solution.

Q: Which Ford E-Series vehicles use E2364S?

A: It covers specified 2004–2008 E-150, E-250, E-350, and E-450 gasoline configurations using the matching midship 35-gallon tank.

Q: Does it fit every 2004–2008 E-Series van?

A: No. Confirm the chassis, engine, gasoline fuel system, tank position, 35-gallon capacity, OE number, and physical hanger layout.

Q: Does it fit a rear-mounted fuel tank?

A: No. The verified application uses the midship tank. A rear tank can require a different hanger.

Q: Why is the 35-gallon capacity important?

A: Hanger length, strainer position, sender travel, and fuel-line layout can change with tank capacity.

Q: How many fuel tubes should be checked?

A: The verified configuration uses a three-tube arrangement with an auxiliary or secondary fuel connection.

Q: Is the fuel-level sender included?

A: Yes. The hanger assembly includes the sender and float arm.

Q: Does E2364S fit diesel E-Series models?

A: No. This replacement is organized for specified gasoline applications.

Q: What should be compared before ordering?

A: Compare chassis, year, engine, tank position and capacity, OE number, flange, three-tube layout, connector, hanger length, and float arm.

Q: What should be tested before replacement?

A: Test pressure, voltage and ground under load, fuse and relay operation, connector condition, external lines, and sender continuity.

Q: What checks are required after installation?

A: Prime the system, inspect the flange and all three fuel connections for leaks, measure pressure, and confirm normal gauge operation.

Returns & Refunds

We accept returns within 30 days of delivery for eligible items. If the product is unused and in original condition, you may request a return according to our refund policy. Full policy details: View Refund Policy . We recommend contacting our support team before initiating a return to ensure the fastest resolution.

Customer Support

If you purchased the wrong part, received an incompatible item, or need installation assistance, please contact us directly.

Email: service@bdfhyk.com

Business Hours:

Mon–Fri 9:00–18:00 (GMT+8)

Mon–Fri 19:00–04:00 (UTC−6 / CST)

Manufacturing Standards

Direct Factory Supply, Cost Saving
Integrated R&D, production, and warehousing. Eliminate middleman markups: same quality at lower prices, superior quality at same prices.

Precision Inspection, Commitment to Excellence
Rigorous inspection process, international certification standards. Each product includes individual inspection.