BDFHYK E2609M fuel pump module for Ford Fusion and Lincoln MKZ

E2609M in-tank fuel pump module with sender float reservoir and strainer

E2609M trapezoid connector single outlet and flange details

E2609M low-pressure fuel delivery module internal components

E2609M Fusion MKZ engine and fuel-system fitment reference

E2609M module dimensions and float-arm configuration

E2609M OE DG9Z interchange and included component reference

Electric Fuel Pump Module Assembly For Ford Fusion L4 1.5L/ L4 1.6L/L4 2.0L,Lincoln MKZ L4 2.0L

$68.99

Product Detail

Type Fuel Pump Assembly
SKU BDDLZ-BD-05-7337
Make
- Ford
- Lincoln
OE Number DG9Z9A407L,DG9Z9H307Y,E2609M,FG1547,P76864M,SP2500M

Trust & Assurance

Free Shipping · 3–7 Business Days

12-Month Warranty

30-Day Return

Secured Payment

Technical Specifications

Part Number	E2609M
Product Type	In-Tank Fuel Pump Module Assembly
Installation Location	Inside the rear fuel tank
Fuel Type	Vehicle-specific gasoline fuel systems
Application	Specified 2013–2020 Ford Fusion and Lincoln MKZ
Engine Coverage	Selected 1.5L, 1.6L and 2.0L configurations
Module Functions	Low-pressure fuel delivery, regulation and fuel-level reporting
Fuel Level Sender	Included
Float and Reservoir	Included
Fuel Tank Pressure Sensor	Application-dependent; compare original module
Regulator	Included in the module configuration
Strainer	Internal strainer included
Outlet Configuration	Single quick-connect outlet
Electrical Connector	Trapezoid connector; compare four-terminal arrangement
OE References	E2609M, FG1547, P76864M, SP2500M, DG9Z-9A407-L, DG9Z-9H307-Y
Fitment Priority	OE number, engine/fuel system, drivetrain, flange, connector and sensor provision
Not Compatible With	Any module using a different flange, outlet, connector, height or sensor configuration
Installation Note	Install a new seal, prime the system and verify low-side pressure
Diagnostic Note	Direct-injection vehicles also require separate high-pressure pump diagnosis

Extended cranking, hesitation, low measured fuel pressure, intermittent stalling, or an inaccurate fuel gauge can indicate a problem in the in-tank delivery module, wiring or control circuit. The BDFHYK E2609M fuel pump module is intended for specified 2013–2020 Ford Fusion and Lincoln MKZ applications using compatible 1.5L, 1.6L or 2.0L fuel systems. These vehicles use multiple fuel-delivery modules across engine, drivetrain and hybrid configurations, so confirm the OE number, flange, trapezoid connector, outlet, pressure-sensor arrangement and module height before installation.

E2609M Ford Fusion and Lincoln MKZ Application

Engine and Year Coverage

Specified Ford Fusion 1.6L applications beginning in 2013
Specified Ford Fusion 1.5L applications beginning in 2014
Specified Ford Fusion and Lincoln MKZ 2.0L applications within the 2013–2020 range

Fitment Verification

Do not select this module by a 2.0L badge alone. Fusion and MKZ gasoline, hybrid, drivetrain and emissions combinations can use different modules. Match E2609M, FG1547, P76864M or SP2500M to the original part and compare the single quick-connect outlet, four-terminal arrangement, trapezoid connector, flange orientation and fuel tank pressure-sensor provision.

Fuel Delivery and Gauge Functions

The module contains the electric in-tank pump, reservoir, internal strainer, regulator, fuel-level sender, float arm and seal shown in the product images. The fuel-level sender reports tank level, while the low-pressure pump supplies the engine fuel system. On direct-injection engines, this in-tank module does not replace the engine-mounted high-pressure pump.

Symptoms and Related Parts to Check

Long cranking, low-pressure supply faults or hesitation under acceleration
Gauge readings that remain fixed, fluctuate or disagree with actual fuel level
Connector heat damage, voltage drop, poor ground or a restricted strainer
High-pressure pump, fuel-pressure sensor or control-module faults on direct-injection engines

Installation Notes

Relieve pressure, disconnect the battery and clean the service area before removing the module. Compare every connection with the removed unit, transfer only components required by the verified application and install a new seal. Prime the system before starting, inspect for leaks, measure low-side pressure and confirm normal gauge response. Do not condemn the module until supply voltage, ground and control commands have been checked.

What’s Included in This Fuel Pump Assembly

Complete fuel pump module
Integrated fuel level sending unit
Fuel strainer (filter sock)
Housing and mounting components

This fuel pump assembly is designed as a direct replacement unit that restores proper fuel delivery and fuel level monitoring.

Estimated Installation Time

Professional mechanic: 1–2 hours
DIY installation: 2–4 hours

Fuel pump replacement usually requires accessing the fuel tank or service panel depending on the vehicle design. Always disconnect the battery and relieve fuel system pressure before installation.

Pump Only vs Fuel Pump Assembly

Option	Description
Replace Pump Only	Lower parts cost but requires disassembling the existing module and reusing older components.
Replace Complete Assembly	A complete module designed for direct installation, helping restore reliable fuel delivery more efficiently.

Most modern vehicles use integrated fuel pump modules, which makes replacing the full assembly the more reliable solution.

Q: Which vehicles use the E2609M module?

A: It is intended for specified 2013–2020 Ford Fusion and Lincoln MKZ applications using compatible 1.5L, 1.6L or 2.0L fuel systems.

Q: Can the module be selected by the 2.0L engine size alone?

A: No. Gasoline, hybrid, drivetrain and emissions configurations can use different modules. Match the OE number and physical layout.

Q: Does this replace the engine-mounted high-pressure fuel pump?

A: No. E2609M is the in-tank low-pressure delivery module. Direct-injection engines also use a separate engine-mounted high-pressure pump.

Q: Is a fuel-level sender included?

A: Yes. The module includes the fuel-level sender and float arm.

Q: Is the fuel tank pressure sensor included?

A: Sensor provision varies across interchanges. Compare the original module and product images before installation.

Q: What connector and outlet should be checked?

A: Compare the trapezoid electrical connector, terminal arrangement and single quick-connect fuel outlet.

Q: What symptoms can indicate a module fault?

A: Extended cranking, low measured supply pressure, hesitation, stalling and inaccurate gauge readings can indicate a fault after wiring and control checks.

Q: What else can cause similar symptoms?

A: A weak power supply, poor ground, damaged connector, control-module fault, restricted line or high-pressure pump problem can produce similar results.

Q: Should the fuel tank be inspected during replacement?

A: Yes. Remove contamination and inspect the tank, seal surface and wiring before installing the new module.

Q: What checks are required after installation?

A: Prime the system, inspect for leaks, measure low-side pressure and verify that the fuel gauge responds normally.

Returns & Refunds

We accept returns within 30 days of delivery for eligible items. If the product is unused and in original condition, you may request a return according to our refund policy. Full policy details: View Refund Policy . We recommend contacting our support team before initiating a return to ensure the fastest resolution.

Customer Support

If you purchased the wrong part, received an incompatible item, or need installation assistance, please contact us directly.

Email: service@bdfhyk.com

Business Hours:

Mon–Fri 9:00–18:00 (GMT+8)

Mon–Fri 19:00–04:00 (UTC−6 / CST)

Manufacturing Standards

Direct Factory Supply, Cost Saving
Integrated R&D, production, and warehousing. Eliminate middleman markups: same quality at lower prices, superior quality at same prices.

Precision Inspection, Commitment to Excellence
Rigorous inspection process, international certification standards. Each product includes individual inspection.