E7142m Fuel Pump Module AssemblyFor Dodge Neon L4 2.4l & L4 2.0l, Plymouth Neon L4 2.0l 2001-2005 Engine 2.0l/2.4l/L4

Extended cranking, intermittent no-start, low fuel pressure, hesitation, stalling, or an inaccurate fuel gauge can indicate an in-tank module problem, but relay, wiring, ground, pressure-control, and contamination faults should be tested first. The BDFHYK E7142M is an aftermarket fuel pump module for select Dodge Neon and Plymouth Neon gasoline applications. Engine and trim matter, especially when comparing a 2.0L non-turbo Neon with a 2.4L SRT-4 configuration.

E7142M Fuel Pump Module for Dodge Neon and Plymouth Neon

This in-tank assembly combines the electric pump, pickup and strainer arrangement, and fuel-level sender configuration. It is not a universal Neon module.

Confirm E7142M Neon Fitment

Dodge Neon Applications

• 2001–2005 Dodge Neon 2.0L L4
• Select 2003–2005 Dodge Neon SRT-4 2.4L turbo applications

Plymouth Neon Application

• 2001 Plymouth Neon 2.0L L4

Verify engine, trim, turbo versus non-turbo configuration, tank, connector, top flange, fuel line fittings, module depth, sender arrangement, and OE number.

E7142M OE and Interchange Number Check

Reference numbers include E7142M, P75027M, P76227M, FG0426, FG0430, SP7142M, F3153A, 402-P7142M, 5018697AA, 5101795AA, and 323-01369. Match both the reference and the physical module.

Diagnose the Neon Fuel System Before Replacement

• Measure fuel pressure and confirm pump power and ground.
• Check fuse, relay, connector condition, voltage drop, and wiring.
• Inspect pressure-control components and clean contamination from the tank.
• Test the gauge circuit separately when fuel delivery is normal.

Dodge and Plymouth Neon Installation Notes

1. Relieve pressure, disconnect the battery, and remove ignition sources.
2. Clean the tank area before opening it.
3. Compare connector, flange, lines, depth, pickup, float travel, seal, and lock-ring interface.
4. Repair electrical and contamination faults before installing the new module.
5. Prime the system, verify pressure and gauge operation, and inspect for leaks.

Before Ordering the E7142M Assembly

Critical fitment note: The 2.4L listing applies only to select configurations. Confirm SRT-4 or non-turbo trim and match the original module. BDFHYK supplies an aftermarket replacement, not a factory OEM part. Confirm package contents before disassembly.