E7219m Fuel Pump Module Assembly For 2007-2012 Dodge Nitro/Jeep Liberty Engine 3.7l/4.0l/V6

Extended cranking, intermittent no-start, low or unstable fuel pressure, hesitation, stalling, or an inaccurate fuel gauge can indicate an in-tank module problem, but relay, wiring, ground, pressure-control, and contamination faults should be diagnosed first. The BDFHYK E7219M is an aftermarket fuel pump module for specific Dodge Nitro and Jeep Liberty gasoline applications. Confirm the exact model year, engine, tank, connector, flange, lines, module depth, sender, and OE number before installation.

E7219M Fuel Pump Module for Dodge Nitro and Jeep Liberty

This in-tank assembly combines the electric fuel pump with the pickup and strainer arrangement and a fuel-level sender configuration. Nitro and Liberty year ranges are different, so fitment should be checked by model and engine.

Confirm E7219M Vehicle and Engine Fitment

2007–2011 Dodge Nitro Applications

• 3.7L V6
• 4.0L V6

2008–2012 Jeep Liberty Application

• 3.7L V6

The Jeep Liberty coverage begins with the 2008 model year. Compare the original connector, top flange, fuel line ports, module height, pickup, float arm, sender layout, and sealing surface.

E7219M OE and Interchange Number Check

Reference numbers include E7219M, FG0888, P76491M, SP7041M, F3220A, 68004095AA, 68004095AB, 68004095AC, and RL004095AB. Match the physical module as well as the reference number.

Diagnose the Nitro or Liberty Fuel System Before Replacement

• Measure fuel pressure and confirm pump power and ground.
• Check fuse, relay, wiring, connector condition, and voltage drop.
• Inspect pressure-control components and tank contamination.
• Test the fuel gauge circuit separately when fuel delivery is normal.

Dodge Nitro and Jeep Liberty Installation Notes

1. Relieve pressure, disconnect the battery, and remove ignition sources.
2. Support and clean the fuel tank before opening it.
3. Compare connector, flange, lines, module depth, pickup, float travel, seal, and lock-ring interface.
4. Repair wiring or contamination faults before installing the new module.
5. Prime the system, verify pressure and gauge operation, and inspect for leaks.

Before Ordering the E7219M Assembly

Critical fitment note: Dodge Nitro coverage is 2007–2011, while Jeep Liberty coverage is 2008–2012. BDFHYK supplies this as an aftermarket replacement, not a factory OEM part. Confirm package contents because seals, lock rings, adapters, and hardware can vary.