BDFHYK E8856M AWD fuel pump module for 2008–2015 Nissan Rogue and Rogue Select

E8856M JM10-series AWD in-tank fuel pump module with sender and strainer

E8856M AWD fuel pump module flange, connector, and outlet details

E8856M electric fuel pump module construction and component details

E8856M Nissan Rogue AWD fitment and JM10 OE reference

E8856M AWD module dimensions and float-arm configuration

E8856M fuel pump module package and included component reference

E8856M JM10-series all-wheel-drive tank module configuration

E8856M SP4061M Electric Fuel Pump Module Assembly For Nissan Rogue Select L4 2.5L,Nissan Rogue L4 2.5L 2008-2015 Engine 2.5L/L4

$63.99

Product Detail

Type Fuel Pump Assembly
SKU BDDLZ-BD-05-7423
Make
- Nissan
OE Number FG1147,17040-JM10A,17040-JM10B,17040-JM10C,4010697,A38012,CFG1147,E8856M,FP22076S,P76755M,QPFS-42,SP4061M,TU321

Trust & Assurance

Free Shipping · 3–7 Business Days

12-Month Warranty

30-Day Return

Secured Payment

Technical Specifications

Brand	BDFHYK
SKU	BDDLZ-BD-05-7423
Reference Part Number	E8856M
Product Type	AWD In-Tank Fuel Pump Module Assembly
Installation Type	Vehicle-specific AWD replacement; drivetrain and OE-family verification required
Application	2008–2013 Nissan Rogue 2.5L AWD; 2014–2015 Nissan Rogue Select 2.5L AWD
Engine Coverage	2.5L L4 gasoline engine in the specified AWD configuration
OE / Interchange References	E8856M; 17040-JM10A; 17040-JM10B; 17040-JM10C; FG1147; 4010697; A38012; CFG1147; FP22076S; P76755M; QPFS-42; SP4061M; TU321
Module Functions	Supplies fuel from the tank and supports fuel-level measurement through the module sender
Fuel Type	Gasoline
Fitment Verification	Confirm AWD, model year, 2.5L engine, JM10 OE family, flange, connector, outlet, module depth, float arm, and strainer
Included Components	Fuel pump module assembly with reservoir, strainer, float arm, regulator/seal components as pictured
Installation Position	Inside the fuel tank
Fitment Priority	AWD drivetrain and JM10-series module take priority over shared Rogue model year and engine
Symptoms to Check	Extended cranking; no start; stalling; low pressure; weak acceleration; inaccurate fuel gauge
Related Parts to Check	Fuse; relay/control circuit; wiring; ground; connector; fuel line; lock ring; tank condition
Installation Note	Relieve pressure, disconnect the battery, confirm AWD, replace the seal, prime, and verify leaks, pressure, and gauge operation
Part Classification	OE-style aftermarket replacement fuel pump module
Replacement Part Note	Not interchangeable with the E8854M / JM00-series FWD module

Extended cranking, intermittent no-start, stalling, low fuel pressure, weak acceleration, or an inaccurate fuel gauge can indicate an in-tank fuel module fault, but voltage and pressure should be tested first. The BDFHYK E8856M is a fuel pump module for specified 2008–2013 Nissan Rogue and 2014–2015 Rogue Select 2.5L all-wheel-drive applications. Confirm AWD, the JM10-series OE number, flange, connector, outlet layout, module height, float arm, and strainer against the removed assembly.

E8856M AWD Fuel Pump Module for Rogue and Rogue Select

Listed All-Wheel-Drive Applications

2008–2013 Nissan Rogue 2.5L L4 AWD
2014–2015 Nissan Rogue Select 2.5L L4 AWD

The FWD configuration uses a different JM00-series module commonly cross-referenced as E8854M. AWD and FWD modules must not be selected by model year and engine alone.

Confirm AWD and the JM10-Series Module

Compare the removed unit with the product images. Verify the JM10-series reference, flange diameter and indexing, electrical connector, fuel outlet, reservoir design, module depth, strainer position, float arm, and retaining method. Do not force a FWD/JM00 module into an AWD tank.

E8856M OE and Interchange References

Common references include E8856M, 17040-JM10A, 17040-JM10B, 17040-JM10C, FG1147, 4010697, A38012, CFG1147, FP22076S, P76755M, QPFS-42, SP4061M, and TU321. Confirm the drivetrain and original OE number together.

Rogue AWD Fuel-System Checks Before Replacement

Confirm battery voltage and normal cranking speed.
Check the fuel-pump fuse, relay or control circuit, power feed, and ground.
Measure voltage and voltage drop at the module connector under load.
Measure fuel pressure and residual pressure with the correct service procedure.
Separate a pump-pressure fault from a fuel-level sender or gauge fault.
Inspect the tank for water, sediment, rust, or deteriorated fuel.

A no-start can also result from crank/cam sensor, ignition, injector-control, immobilizer, wiring, or engine-management faults. Complete the diagnosis before replacing the module.

Nissan Rogue AWD Installation and Final Checks

Relieve fuel-system pressure and disconnect the battery.
Clean the tank access area before opening the fuel tank.
Record the flange, connector, fuel-line, strainer, and float-arm orientation.
Remove contaminated fuel and correct damaged tank, line, or wiring conditions.
Install a new seal and fully secure the retaining ring.
Keep the strainer and float arm clear of internal tank structures.
Reconnect the fuel line and electrical connector without forcing the fittings.
Prime the system and inspect every disturbed connection for leaks.
Verify fuel pressure, starting, engine operation, and fuel-gauge response.

Do not run the pump dry. Recheck the drivetrain and JM10 reference before installation because E8856M and E8854M are not direct substitutes.

What’s Included in This Fuel Pump Assembly

Complete fuel pump module
Integrated fuel level sending unit
Fuel strainer (filter sock)
Housing and mounting components

This fuel pump assembly is designed as a direct replacement unit that restores proper fuel delivery and fuel level monitoring.

Estimated Installation Time

Professional mechanic: 1–2 hours
DIY installation: 2–4 hours

Fuel pump replacement usually requires accessing the fuel tank or service panel depending on the vehicle design. Always disconnect the battery and relieve fuel system pressure before installation.

Pump Only vs Fuel Pump Assembly

Option	Description
Replace Pump Only	Lower parts cost but requires disassembling the existing module and reusing older components.
Replace Complete Assembly	A complete module designed for direct installation, helping restore reliable fuel delivery more efficiently.

Most modern vehicles use integrated fuel pump modules, which makes replacing the full assembly the more reliable solution.

Q: Which vehicles are listed for E8856M?

A: Specified 2008–2013 Nissan Rogue and 2014–2015 Rogue Select 2.5L all-wheel-drive applications are listed.

Q: Is E8856M for FWD or AWD?

A: E8856M and the JM10-series references correspond to the AWD configuration.

Q: Can E8856M replace E8854M?

A: No. E8854M is associated with the FWD/JM00 configuration and should not be substituted.

Q: Which OE references should be checked?

A: Check E8856M, 17040-JM10A, 17040-JM10B, 17040-JM10C, FG1147, P76755M, SP4061M, and TU321.

Q: What should be compared before ordering?

A: Compare drivetrain, OE number, flange, connector, outlet, module height, reservoir, strainer, and float arm.

Q: Does the module include a fuel-level sender?

A: A float-arm sender configuration is included as pictured.

Q: Should fuel pressure and voltage be tested first?

A: Yes. Pressure, voltage, ground, command, and voltage-drop checks help confirm an in-tank module fault.

Q: Should the tank seal and lock ring be inspected?

A: Yes. Replace a damaged seal or lock ring and clean the sealing surface before installation.

Q: Can the electric pump be run dry?

A: No. Do not energize the pump outside fuel.

Q: What must be checked after installation?

A: Prime the system, inspect for leaks, verify fuel pressure and starting, and confirm the fuel gauge responds correctly.

Returns & Refunds

We accept returns within 30 days of delivery for eligible items. If the product is unused and in original condition, you may request a return according to our refund policy. Full policy details: View Refund Policy . We recommend contacting our support team before initiating a return to ensure the fastest resolution.

Customer Support

If you purchased the wrong part, received an incompatible item, or need installation assistance, please contact us directly.

Email: service@bdfhyk.com

Business Hours:

Mon–Fri 9:00–18:00 (GMT+8)

Mon–Fri 19:00–04:00 (UTC−6 / CST)

Manufacturing Standards

Direct Factory Supply, Cost Saving
Integrated R&D, production, and warehousing. Eliminate middleman markups: same quality at lower prices, superior quality at same prices.

Precision Inspection, Commitment to Excellence
Rigorous inspection process, international certification standards. Each product includes individual inspection.