BDFHYK E9199M flex-fuel pump module for Toyota Tundra Sequoia 5.7L

E9199M in-tank pump sender reservoir float and strainer assembly

E9199M electrical connector fuel ports and flange details

E9199M 26-gallon Tundra flex-fuel fitment reference

E9199M Toyota 77020-0C120 module dimensions and sender configuration

E9199M Sequoia Tundra OE interchange and component reference

Electric Fuel Pump Module Assembly For Toyota Tundra V8 5.7L 2012-2019; Toyota Sequoia V8 5.7L 2012-2018 Engine 5.7L/V8

$75.99

Product Detail

Type Fuel Pump Assembly
SKU BDDLZ-BD-05-7331
Make
- Toyota
OE Number E9199M,P77054M,FG1624,SP9175M,77020-0C120

Trust & Assurance

Free Shipping · 3–7 Business Days

12-Month Warranty

30-Day Return

Secured Payment

Technical Specifications

Part Number	E9199M
Product Type	In-Tank Fuel Pump and Sender Module
Installation Location	Inside the rear fuel tank
Fuel Type	Flex-fuel application
Application	2012–2019 Toyota Tundra; 2012–2018 Toyota Sequoia
Engine Coverage	5.7L V8, 3UR-FBE configuration
Fuel Tank Coverage	Tundra 26-gallon tank; verify Sequoia tank configuration
Module Functions	Fuel delivery, reservoir pickup and fuel-level reporting
Fuel Level Sender	Included
Float and Reservoir	Included
Strainer	Included
Fuel Connections	Single inlet and single outlet configuration
Fuel Tank Pressure Sensor	Not included
Electrical Connector	Vehicle-specific; compare terminal layout and keying
OE References	E9199M, FG1624, SP9175M, P77054M, 77020-0C120, 83320-0C040
Fitment Priority	Flex-fuel system, 5.7L engine, tank capacity, OE and layout
Not Compatible With	Non-flex-fuel or different tank-capacity module configurations
Installation Note	Clean the tank, replace the seal and protect float-arm travel
Diagnostic Note	Test pressure, voltage, ground, relay, wiring and tank condition

Hard starting, low measured fuel pressure, hesitation, stalling, or an incorrect fuel-level reading can indicate a fuel pump module fault after the relay, wiring, power supply, lines, and engine controls have been checked. This E9199M replacement is intended for specified Toyota Tundra and Sequoia 5.7L flex-fuel configurations. For Tundra applications, confirm the 26-gallon tank, 3UR-FBE flex-fuel system, OE number, flange, connector, ports, module height, and sender layout before ordering.

E9199M 5.7L Flex-Fuel Application

Verified coverage includes specified 2012–2019 Toyota Tundra 5.7L flex-fuel vehicles with the 26-gallon tank and specified 2012–2018 Toyota Sequoia 5.7L flex-fuel vehicles. A non-flex-fuel module or a module for another tank capacity is not automatically interchangeable.

Fitment Verification

Confirm the 5.7L 3UR-FBE flex-fuel application from the VIN and emissions information.
For Tundra, verify the 26-gallon fuel tank rather than a larger-capacity tank.
Match E9199M, FG1624, SP9175M, P77054M, or Toyota 77020-0C120.
Compare the flange, electrical connector, inlet/outlet arrangement, module height, sender, and sensor provision.

Module Functions and Included Components

Complete in-tank pump and sender assembly supports fuel delivery and level reporting.
Integrated reservoir, strainer, sender, and float are configured for the specified tank.
Single inlet and outlet configuration must match the original assembly.
Fuel tank pressure sensor is not included in the verified aftermarket configuration.

Symptoms and Diagnostic Checks

Measure fuel pressure and test voltage and ground at the module under load. Inspect the relay, fuse, connector, fuel lines, flex-fuel system information, sender circuit, and tank for contamination. A different tank size, non-flex module, wiring fault, restricted line, or engine-control problem can cause incorrect diagnosis or fitment.

Installation Notes

Relieve system pressure and disconnect the battery before opening the tank. Clean the tank and sealing surface, install a new compatible seal, avoid bending the float arm, and secure the module evenly. Prime the system, inspect for leaks, verify fuel pressure and gauge operation, and confirm that no EVAP connections are damaged.

What’s Included in This Fuel Pump Assembly

Complete fuel pump module
Integrated fuel level sending unit
Fuel strainer (filter sock)
Housing and mounting components

This fuel pump assembly is designed as a direct replacement unit that restores proper fuel delivery and fuel level monitoring.

Estimated Installation Time

Professional mechanic: 1–2 hours
DIY installation: 2–4 hours

Fuel pump replacement usually requires accessing the fuel tank or service panel depending on the vehicle design. Always disconnect the battery and relieve fuel system pressure before installation.

Pump Only vs Fuel Pump Assembly

Option	Description
Replace Pump Only	Lower parts cost but requires disassembling the existing module and reusing older components.
Replace Complete Assembly	A complete module designed for direct installation, helping restore reliable fuel delivery more efficiently.

Most modern vehicles use integrated fuel pump modules, which makes replacing the full assembly the more reliable solution.

Q: Which vehicles use E9199M?

A: It is intended for specified 2012–2019 Toyota Tundra and 2012–2018 Toyota Sequoia 5.7L flex-fuel configurations.

Q: Does it fit a non-flex-fuel 5.7L vehicle?

A: Do not assume compatibility. The module is associated with the flex-fuel configuration and must match OE 77020-0C120 or a verified interchange.

Q: Which Tundra fuel tank is required?

A: The verified application uses the 26-gallon Tundra tank. Larger-capacity tanks can use a different module.

Q: Which engine code should be checked?

A: The key flex-fuel engine configuration is 3UR-FBE, but the VIN and original module should remain the final references.

Q: Is the fuel-level sender included?

A: Yes. The pump and sender assembly includes the fuel-level sender and float.

Q: Is a tank pressure sensor included?

A: No. The verified aftermarket configuration is listed without a fuel tank pressure sensor.

Q: What should be compared before ordering?

A: Compare fuel type, tank capacity, OE number, flange, connector, ports, module height, and sender layout.

Q: What symptoms can indicate module failure?

A: Low measured pressure, long cranking, hesitation, stalling, and incorrect gauge readings can indicate a fault.

Q: Why should the fuel tank be cleaned?

A: Contamination is a common cause of repeat pump and strainer failure.

Q: What checks are required after installation?

A: Prime the system, inspect the seal and connections for leaks, measure pressure, and verify normal gauge operation.

Returns & Refunds

We accept returns within 30 days of delivery for eligible items. If the product is unused and in original condition, you may request a return according to our refund policy. Full policy details: View Refund Policy . We recommend contacting our support team before initiating a return to ensure the fastest resolution.

Customer Support

If you purchased the wrong part, received an incompatible item, or need installation assistance, please contact us directly.

Email: service@bdfhyk.com

Business Hours:

Mon–Fri 9:00–18:00 (GMT+8)

Mon–Fri 19:00–04:00 (UTC−6 / CST)

Manufacturing Standards

Direct Factory Supply, Cost Saving
Integrated R&D, production, and warehousing. Eliminate middleman markups: same quality at lower prices, superior quality at same prices.

Precision Inspection, Commitment to Excellence
Rigorous inspection process, international certification standards. Each product includes individual inspection.