Rear Wheel Bearing & Hub Assembly OE 512284 for Toyota Highlander 2004-2013; Toyota Venza 2009-2016; Lexus RX400h 2006-2008 (AWD)

Worked great on a 2011 Audi S4 (B8 platform - the sporty A4) - location front wheel. No issues with fitment - included bolts eliminated need to buy them separately. No need for a bearing press - the hub & bearing assembly installs as one part. Definitely good value.

Pure quality parts....

I installed this set of wheel bearings on the front wheels of my vehicle. They are 100% compatible with my Corolla. The kit includes two pieces with four tabs each, and they fit snugly. Installation was easy, and the pieces fit well in the hub. The previous bearings made a very annoying squeaking noise, and the ride wasn't smooth. After installing these bearings, I noticed an improvement in ride smoothness, and the wheel noise is gone. These bearings are made of good, durable, and reliable materials for everyday use. They are well-designed. I installed them two months ago, and they work perfectly.

Excelente

Everything worked out good with this hub. It fit perfectly and is working as it should. The hub feels good with no slop and it seems like it��s the perfect fit with the bearings inside. The wheel speed sensor wires is good also. Make sure to clean your surfaces before putting it on. Remove all surface rust and add a layer of fluid film to the surfaces before locking it down. 129 ft. Lbs is the torque spec for the bolts to tighten this to the steering knuckle. This is a very good price for the hub. Don��t expect to find it cheaper at the parts store. I checked Autozone and it was $246

Though it��s only been a few weeks since installing the BDFHYK 513265 Front Wheel Bearing and Hub Assembly on my 2008 Prius, I��ve been pleasantly surprised so far. There��s been no squeaking, grinding, or unwanted noise, and the car drives smoothly��something I wasn��t completely sure I��d get from a non-OEM part. I was initially hesitant to go this route, since original Toyota parts are usually the safer bet. But my partner, who works on vehicles, thought it was worth testing this option before committing to the higher OEM cost. Installation went smoothly on the front driver��s side, and so far, performance has been solid. That said, we��re realistic about how it might hold up through a full Minnesota winter. If it makes it a year without developing vibration or play in the steering wheel, I��d consider that a success. For anyone in a similar situation��needing a reliable, affordable replacement to keep a Prius rolling without immediately going OEM��this has proven to be a good temporary or mid-term fix so far.

This hub assembly fits perfectly and functions just as the oem part did. The hub is well made and does it's job silently and smooth. The splines fit my axle just like the stock part. Overall I'm happy with the hub it fixed my problem and I see it lasting for years.

The packaging for this is just simply a cardboard box with a little bit of cardboard inside it was absolutely wrecked by USPS. HOWEVER, the hub is completely fine. Took me much longer than anticipated to get off my old wheel hub to put this one on but a little bit of wire wheel clean everything up put some anti-seas slapped it on and cars back together and driving fine no weird noises no play in the wheel so for $35 I think this thing is a steal. I drift this car and ride it pretty hard so we��ll see you in 1000 miles or so if it holds up.

I ordered these BDFHYK Front Wheel Hub / Bearing Assemblies for one of our older Acura��s, and I��m talking OLDER. It seems that as much as we try to pare down ��the fleet�� of older vehicles, it never seems to work out as we planned. Case in point, the old Acura. It keeps on going and going. Recently I decided it was time for new wheel bearings but it made more sense to order the whole hub assembly, bearings and all. When I ran across this BDFHYK set I knew I had to order it. I��ve had good luck with their products and these wheel hubs / wheel bearing assemblies are no different. They are well made from steel (wheel hubs) and brass (wheel studs). They fit like they are OEM made and at a fraction of the price! Note that these are NOT for models with ABS. The bearings are sealed and pre-lubricated; meaning no more packing wheel bearings with grease and having to press them into place (I don��t have a press that works properly anymore so that��s for the best). The bearings operate smoothly and as expected. For the price, I don��t think you can beat the fit, function or value for the price.