60" Universal Truck Bed LED Light Kit, 12V Light Strips with Switch

Light Up Your Truck Bed After Dark.

Dual 60" LED Strips. 12V Power. Simple ON/OFF Control.

Add convenient lighting to your truck bed for loading, unloading, finding tools, and accessing gear after dark. These 6000K cool-white LED strips provide bright, wide-area cargo lighting and connect to a compatible 12V vehicle power source.

Choose 1 Strip for focused lighting or 2 Strips for broader left- and right-side truck bed coverage. An inline ON/OFF switch provides convenient control when you need additional cargo-area visibility.

Why Add LED Truck Bed Lights?

• See Cargo After Dark: Illuminate tools, boxes, tie-down points, camping gear, and other items inside your truck bed.
• Choose Your Coverage: Use 1 Strip for focused lighting or 2 Strips for wider illumination along both sides of the bed.
• Simple ON/OFF Control: The included inline switch lets you control the lights directly when needed.
• Built for Cargo Areas: IP67-sealed light strips help protect the LEDs from water, dust, snow, and road debris during normal vehicle use.

Choose Your Coverage

Each LED light strip measures 60 inches (1.5 m). Select the configuration that best matches your truck bed and intended lighting area.

1 Strip — Focused Lighting
A simple option for single-side installation or a specific cargo area.

2 Strips — Wider Bed Coverage
Install one strip along each side of the truck bed for broader, more balanced cargo-area illumination.

Before ordering: Measure the intended mounting area and confirm there is sufficient space for the selected configuration.

Built for Clear, Wide Cargo Lighting

The 6000K cool-white output is designed for functional cargo visibility rather than decorative RGB lighting. Bright white illumination makes it easier to see tools, boxes, tie-downs, equipment, and other cargo when working around your truck after dark.

• Strip Length: 60 in / 1.5 m each
• Light Color: 6000K Cool White
• Voltage: 12V
• LED Type: 5050 SMD
• Light Strip Protection: IP67
• Control: Inline ON/OFF Switch

Simple 12V Installation

Connect the light kit to a suitable 12V power source and use the included inline switch for convenient ON/OFF control. The 2-strip option uses a splitter to power both LED strips from the main wiring harness.

• 12V Powered: Connects to a compatible vehicle or accessory power source.
• Easy Control: Inline ON/OFF switch provides direct light control.
• Secure Mounting: Adhesive backing plus clips, screws, and cable ties help keep the strips and wiring in place.

What's Included

Package contents vary by selected configuration.

• LED Light Strips: 1 or 2 × 60" strips, depending on selected option
• Wiring Kit: Wiring harness with inline ON/OFF switch
• 2-Strip Option: Includes splitter for connecting both light strips
• Mounting Hardware: Clips, screws, and cable ties

Note: Battery is not included.

Made for Truck Bed Use

Designed primarily for pickup truck beds, the 60-inch LED strips provide convenient cargo lighting for loading gear, finding tools, camping, and everyday use after dark.

Universal Fit: This is not a vehicle-specific part. Confirm available mounting space, wire routing, and access to a suitable 12V power source before ordering.

Using a Tonneau Cover? Make sure the strips and wiring stay clear of cover rails, clamps, hinges, seals, and folding or rolling hardware.

Before Installation

• Measure First: Test-fit the 60-inch strip(s) and confirm sufficient mounting space.
• Check Power: Confirm a suitable 12V power source and correct polarity before connecting.
• Plan Wire Routing: Keep wiring away from heat, sharp edges, hinges, latches, and moving parts.
• Check Clearance: Make sure the lights and wiring do not interfere with tonneau covers, bed rails, tie-downs, or other accessories.

Important: IP67 applies to the LED light strips. Protect electrical connections and installation points appropriately from moisture.