BDFHYK 2PCS CV joint Toyota Sienna 2004-2010 front left and right replace NCV69607 NCV69608

Toyota Sienna front left and right CV axle shaft assemblies with protective boots

CV joint shaft detail for Toyota Sienna showing splined axle ends boots and clamps

Two-piece front CV axle set for Toyota Sienna 2004-2010 left and right positions

Toyota Sienna CV joint replacement fitment reference for both front axle positions

OE-style aftermarket Toyota Sienna front CV axle set replace 4342008020 665260

2PCS Front Left + Right CV Axle Shaft Assembly for Toyota Sienna 2004-2010 | Replace NCV69607/NCV69608

$214.99

Product Detail

Type CV Joint (Constant Velocity Joint)
OE Number 4342008020, NCV69607, NCV69608, 665260, 66-5260

Trust & Assurance

Free Shipping · 3–7 Business Days

12-Month Warranty

30-Day Return

Secured Payment

BDFHYK 2PCS Front CV Axle Shaft Assembly Set for Toyota Sienna 2004-2010

This BDFHYK two-piece front CV axle set includes one front left assembly and one front right assembly for listed Toyota Sienna 2004-2010 applications. It is an OE-style aftermarket replacement for vehicles where inspection confirms joint wear, boot damage, grease leakage, clicking while turning, or vibration under acceleration. When researching a cv joint Toyota Sienna application, confirm the year, drivetrain, axle positions, and reference numbers before ordering.

Toyota Sienna CV Joint Shaft Set Fitment

This cv joint shaft set is listed for Toyota Sienna models from 2004 through 2010 and covers both front positions. A Toyota Sienna CV joint replacement may require different left and right axle designs, so do not assume the parts are interchangeable. Compare both removed axles with the product images before installation.

Make	Model	Years	Package Position
Toyota	Sienna	2004-2010	Front Left + Front Right

CV Joint Toyota Sienna Reference Numbers

Reference and interchange numbers shown for this set include 4342008020, NCV69607, NCV69608, 665260, and 66-5260. Confirm the relevant number against the original part whenever possible. The correct cv joint Toyota Sienna set should also match the original axle lengths, spline configuration, seal areas, axle nuts, ABS-related features, and side-specific end designs.

Symptoms to Check Before Toyota Sienna CV Joint Replacement

Clicking or popping during turns
Vibration or shudder during acceleration
Grease around a torn, cracked, or loose CV boot
Clunking as driveline load changes
Visible axle damage or excessive joint movement

A worn cv joint shaft can cause these symptoms, but wheel bearings, tires, mounts, suspension components, and other driveline parts can produce similar complaints. Diagnose the vehicle before beginning front axle replacement.

Toyota Sienna Front Axle Installation Checks

Place each new assembly beside the corresponding original axle before installation. Confirm front left and front right placement, spline count, compressed length, seal contact area, ABS configuration, and axle nut design. Use vehicle-specific service information for torque specifications and fastener procedures. This front axle set should be installed only after both sides and the listed references are confirmed.

Package Includes

1 x Front Left CV Axle Shaft Assembly
1 x Front Right CV Axle Shaft Assembly

This is a BDFHYK OE-style aftermarket replacement set, not a Genuine OEM or Official OEM Toyota product.

Technical Specifications

Brand	BDFHYK
Product Type	CV Axle Shaft Assembly
Product Configuration	2PCS Front Left + Front Right CV Axle Shaft Assembly Set
SKU	BDDLZ-BD-05-DS03-00022BK-004-W
Fitment	Toyota Sienna 2004-2010
Vehicle Make	Toyota
Vehicle Model	Sienna
Placement on Vehicle	Front Left + Front Right
Reference Number	NCV69607; NCV69608
OE / Interchange Number	4342008020; NCV69607; NCV69608; 665260; 66-5260
Common Symptoms to Inspect	Clicking or popping while turning; vibration during acceleration; grease near the wheel or CV boot; clunking under load; torn or leaking CV boot
Replacement Type	OE-style aftermarket replacement
Critical Note	Confirm year, make, model, trim, engine, drivetrain, axle position, and OE/interchange number before ordering.

Q: Will this two-piece CV axle set fit my Toyota Sienna?

A: This set is listed for Toyota Sienna 2004-2010 applications. Confirm the year, trim, engine, drivetrain, front axle positions, and OE/interchange numbers before ordering.

Q: Does this listing include both front CV axles?

A: Yes. The package includes one front left and one front right CV axle shaft assembly.

Q: Does this set replace NCV69607 and NCV69608?

A: The listing references NCV69607 and NCV69608. It also references 4342008020, 665260, and 66-5260. Compare the relevant number and physical axle configuration with the original parts before ordering.

Q: Can I use this set if only one Toyota Sienna CV joint is worn?

A: The package contains both front sides. You may replace the diagnosed side, but identify the left and right assemblies correctly and inspect both original axles for boot damage, leakage, noise, or joint play.

Q: What symptoms can indicate a worn Toyota Sienna CV joint?

A: Clicking or popping while turning, vibration during acceleration, grease near the wheel or boot, clunking under load, or a torn boot can be related to a worn CV axle or joint. Confirm the source before replacement.

Q: Should I replace only the CV boot or the complete axle?

A: Boot service may be considered when damage is recent and the joint remains clean, quiet, and free of play. A noisy, contaminated, binding, loose, or vibrating joint generally calls for complete axle replacement.

Q: What should I compare before installing the set?

A: Compare left and right positions, inner and outer spline counts, compressed lengths, seal surfaces, axle nut styles, ABS configurations, and OE/interchange numbers with the removed parts.

Q: Are the front left and right CV axles interchangeable?

A: Not necessarily. The two sides can differ in length, joint design, spline details, seal area, or axle-end configuration. Install each assembly on its specified side.

Q: Can this set fix clicking or vibration?

A: It can help when the diagnosed cause is a worn front CV axle or CV joint. Tires, wheel balance, bearings, mounts, suspension parts, and other driveline components should also be checked if symptoms remain.

Q: Is this a Genuine OEM Toyota axle set?

A: No. This is a BDFHYK OE-style aftermarket replacement set, not a factory-branded Genuine OEM or Official OEM product.

Q: Can I install this Toyota Sienna CV axle set at home?

A: Experienced DIY users may complete the repair with suitable tools and vehicle-specific service information. Professional installation is recommended if you are unfamiliar with axle torque, suspension separation, seals, or ABS components.

CV Axle Buying Guide

Before purchasing a replacement CV Axle Shaft Assembly, confirm the key compatibility details below to ensure proper fitment.

1. Drivetrain Type

FWD – typically uses two front CV axles
AWD / 4WD – uses front and rear CV axles
RWD with independent rear suspension – may use rear CV axles

2. Left vs Right Axle Position

CV axles are usually sold by installation position:

Front Left (Driver Side)
Front Right (Passenger Side)

Left and right positions are determined from the driver’s seating position. Because the transmission is not centered, the two axles often have different lengths and joint designs and are not interchangeable.

3. Compatibility Details

ABS Tone Ring – required on certain vehicles for ABS sensors
Spline Count – must match the transmission and wheel hub
OE Part Number – the most reliable way to confirm compatibility

4. Estimated Installation Time & Tools

Professional mechanic: 1–1.5 hours
DIY installation: 3–5 hours

Floor jack and jack stands
Axle nut socket (30mm / 32mm / 36mm)
Breaker bar
Torque wrench
Ball joint separator or pickle fork

Ensure the vehicle is securely supported before starting installation.

Returns & Refunds

We accept returns within 30 days of delivery for eligible items. If the product is unused and in original condition, you may request a return according to our refund policy. Full policy details: View Refund Policy . We recommend contacting our support team before initiating a return to ensure the fastest resolution.

Customer Support

If you purchased the wrong part, received an incompatible item, or need installation assistance, please contact us directly.

Email: service@bdfhyk.com

Business Hours:

Mon–Fri 9:00–18:00 (GMT+8)

Mon–Fri 19:00–04:00 (UTC−6 / CST)

Manufacturing Standards

Direct Factory Supply, Cost Saving
Integrated R&D, production, and warehousing. Eliminate middleman markups: same quality at lower prices, superior quality at same prices.

Precision Inspection, Commitment to Excellence
Rigorous inspection process, international certification standards. Each product includes individual inspection.

Verified Fitment

Precision-matched to your specific model.

Factory Direct Price

Direct price with strict quality control.

30-Day Easy Returns

Risk-free shopping with hassle-free returns.

Installation Guides

Step-by-step help for a smooth setup.