Front CV Axle Shaft Assembly for Subaru Forester 2014-2018, Left or Right | Replace NCV66012

Subaru Forester Front CV Axle Shaft Assembly

This BDFHYK Subaru Forester CV axle is an OE-style aftermarket replacement based on the original listing information for 2014-2018 Subaru Forester applications. The package contains one axle assembly for the verified front-left or front-right position. It is not a two-piece left-and-right pair.

Clicking during turns, acceleration-related vibration, grease around a torn boot and clunking as drivetrain load changes are common reasons to inspect a Subaru Forester CV joint. Similar symptoms can come from wheel bearings, tires, engine or transmission mounts, brakes, suspension parts and other driveline connections, so diagnose the source and required side before replacement.

Subaru Forester CV Axle Fitment

Verify year, model, trim, engine, transmission, drivetrain and required axle side before ordering. A CV joint Subaru Forester assembly may look similar on both sides or across different configurations, but shaft length, spline ends, seal surfaces, joint housing and retaining methods can differ.

NCV66012 and Subaru Interchange References

Cross-check NCV66012, 28321SG000, 28321SG010, 447-62370, 447-62371, 44762370, 44762371, 3905619710, 66-7568 and 667568 against the removed axle, an OE catalog or a qualified parts lookup. Confirm the number together with the required left or right position and complete vehicle configuration.

When to Inspect a Subaru Forester CV Joint

Inspect the suspected Subaru Forester CV axle when the vehicle shows:

• Clicking or popping that becomes more noticeable while turning.
• Vibration or shudder under acceleration.
• Grease around one front wheel, control arm or splash shield.
• Clunking during acceleration and deceleration transitions.
• A cracked CV boot, loose clamp, measurable joint play or visible shaft damage.

An outer Subaru Forester CV joint may click more clearly in turns, while an inner joint can contribute to acceleration-related vibration. These patterns help guide inspection but do not identify the required side without a physical check.

What This Subaru Forester CV Axle Includes

The package contains one complete front CV axle shaft assembly for the verified side. It does not include both front axles. The original listing identifies protective CV joint boots, grease and retaining clamps as part of the assembly.

Fitment Checks Before Ordering a Subaru Forester CV Axle

• Verify year, model, trim, engine, transmission and drivetrain.
• Confirm whether the repair requires the front-left or front-right axle.
• Match NCV66012 or another listed interchange reference.
• Compare shaft length and layout, inner and outer spline ends, boot locations, seal areas and retaining methods.
• Review the service procedure for an axle nut, seal, clip, cotter pin or other one-time-use hardware that may be required separately.

Subaru Forester Front Axle Installation Checkpoints

Follow vehicle-specific service information and support the vehicle correctly. Inspect the appropriate wheel hub, transmission or front differential connection, seal area and nearby suspension parts while the original Subaru Forester CV axle is removed. Do not force the splines or pull the assembly into place by the boots. Confirm full engagement, tighten hardware to the applicable specification, and check for fluid leaks, boot contact, abnormal noise and vibration after installation.

Package Includes

• 1 front CV axle shaft assembly for the verified left or right side.

Important: This is a single-axle OE-style aftermarket replacement, not a front-left and front-right pair. It is not represented as a Genuine or Official OEM part. Verify the required side and interchange references before purchase.