BDFHYK Buick Cadillac Chevy single front CV axle shaft assembly replace NCV10046

Front CV axle for Buick LaCrosse Regal Cadillac XTS Chevy Impala and Malibu

Chevy Impala CV joint shaft detail with splined ends protective boots and clamps

Chevy Malibu Buick and Cadillac front CV axle assembly product detail

OE-style aftermarket single front CV axle for Buick Cadillac and Chevrolet

GM front CV axle interchange reference NCV10046 13228208 22743589

BDFHYK single front CV axle package for the verified left or right side

Front CV Axle Shaft Assembly for Buick LaCrosse, Regal, Cadillac XTS, Chevy Impala & Malibu | Replace NCV10046

$78.99

Product Detail

Type CV Joint (Constant Velocity Joint)
OE Number NCV10046, 13228208, 22743589, 22796199, 22870111, 661513, 66-1513

Trust & Assurance

Free Shipping · 3–7 Business Days

12-Month Warranty

30-Day Return

Secured Payment

Buick LaCrosse, Regal, Cadillac XTS, Chevy Impala & Malibu Front CV Axle

This BDFHYK front CV axle shaft assembly is an OE-style aftermarket replacement based on the original listing information for selected Buick, Cadillac and Chevrolet applications. The original product data identifies the assembly for a front-left or front-right application depending on the vehicle configuration. The package contains one axle, so confirm the required side before ordering.

A CV joint Chevy Impala or CV joint Chevy Malibu concern may begin with clicking during turns, acceleration-related vibration, grease near a split boot or clunking as load changes. Similar symptoms can also come from tires, wheel bearings, engine or transmission mounts, brakes and suspension components, so diagnose the source before replacement.

Buick, Cadillac and Chevrolet Front CV Axle Fitment

Vehicle	Years	Listed Position
Buick LaCrosse	2010-2016	Front Left or Front Right—verify vehicle configuration
Buick Regal	2011-2017	Front Left or Front Right—verify vehicle configuration
Cadillac XTS	2013-2019	Front Left or Front Right—verify vehicle configuration
Chevrolet Impala	2014-2020	Front Left or Front Right—verify vehicle configuration
Chevrolet Malibu	2013-2015	Front Left or Front Right—verify vehicle configuration

Verify the exact year, model, trim, engine, transmission, drivetrain and required axle side before ordering. A CV joint Chevy Impala can vary by configuration, and a CV joint Chevy Malibu should be matched by OE/interchange number and physical shaft details rather than model year alone.

NCV10046 and GM Interchange References

Cross-check NCV10046, 13228208, 22743589, 22796199, 22870111, 661513 and 66-1513 against the removed axle, an OE catalog or a qualified parts lookup. Confirm the reference together with the required front side and complete vehicle configuration.

Symptoms to Check on a Buick, Cadillac or Chevrolet CV Joint

Customers researching a CV joint Chevy Impala, CV joint Chevy Malibu or Chevy Malibu CV joint replacement often need to separate axle symptoms from other front-end issues. Inspect the suspected axle when the vehicle shows:

Clicking or popping while turning.
Shudder or vibration that becomes more noticeable under acceleration.
Grease around a front wheel, control arm or splash shield.
Clunking when changing between acceleration and deceleration.
A cracked boot, loose clamp, joint play or visible shaft damage.

An outer CV joint Chevy Impala may click more clearly during turns, while an inner joint can contribute to acceleration-related vibration. These signs support inspection but do not confirm which side requires replacement.

What This GM Front CV Axle Package Includes

The package contains one complete front CV axle shaft assembly. It is not a two-piece pair. The original listing identifies protective CV joint boots, grease and retaining clamps as part of the assembly.

Fitment Checks Before Chevy Malibu CV Joint Replacement

Verify year, model, trim, engine, transmission and drivetrain.
Confirm whether the vehicle requires this assembly on the front-left or front-right side.
Match NCV10046 or another listed interchange reference.
Compare inner and outer spline ends, shaft length and layout, seal surfaces, boot positions and retaining methods.
Review the service procedure for an axle nut, seal, clip, cotter pin or other one-time-use hardware that may be required separately.

Buick, Cadillac and Chevrolet Front Axle Installation Checkpoints

Follow vehicle-specific service information and support the vehicle correctly. Inspect the appropriate wheel hub, transmission connection, seal area and nearby suspension components while the original axle is removed. Do not force the splines or pull the assembly into place by the boots. Confirm full engagement, tighten hardware to the applicable specification, and check for leaks, boot contact, abnormal noise and vibration after installation.

Package Includes

1 front CV axle shaft assembly for the verified side.

Important: This is an OE-style aftermarket replacement and is not represented as a Genuine or Official OEM part. Verify the required side, vehicle configuration and interchange references before purchase.

Technical Specifications

Brand	BDFHYK
Product Type	CV Axle Shaft Assembly
Replacement Type	OE-style aftermarket replacement
Vehicle Fitment	Buick LaCrosse 2010-2016; Buick Regal 2011-2017; Cadillac XTS 2013-2019; Chevrolet Impala 2014-2020; Chevrolet Malibu 2013-2015
Position	Front Left or Front Right - verify vehicle configuration
Quantity	1PC
OE / Interchange Numbers	NCV10046, 13228208, 22743589, 22796199, 22870111, 661513, 66-1513
Boot / Lubrication / Clamps	Protective CV joint boots, grease, and retaining clamps
Common Inspection Reasons	Clicking during turns, vibration under acceleration, grease leakage, damaged boots, clunking, or confirmed joint play
Critical Fitment Checks	Year, model, trim, engine, transmission, drivetrain, axle side, splines, shaft layout, seal area, retaining method, and OE/interchange references
Package Includes	1 front CV axle shaft assembly for the verified side
Installation Notes	Follow vehicle-specific service information, confirm full inner and outer engagement, use applicable torque specifications, and inspect seals and hub connections

Q: How do I confirm this CV axle fits Buick LaCrosse, Buick Regal, Cadillac XTS, Chevrolet Impala and Chevrolet Malibu?

A: Verify the listed model and year range, then confirm trim, engine, transmission, drivetrain, required axle side, original shaft layout, and at least one OE or interchange number. Model year alone is not enough when multiple configurations exist.

Q: Which axle position does this listing cover?

A: The original listing identifies front-left or front-right use depending on the vehicle configuration. The package contains one axle, so verify the required side before ordering.

Q: How many CV axle assemblies are included?

A: The package includes 1 front CV axle shaft assembly for the verified side.

Q: Which OE or interchange numbers can I use for comparison?

A: Cross-check NCV10046, 13228208, 22743589, 22796199, 22870111, 661513, 66-1513. Confirm a matching number together with the vehicle configuration and required axle side.

Q: Is this a Genuine OEM axle?

A: No. This is a BDFHYK OE-style aftermarket replacement and is not represented as a Genuine or Official OEM part.

Q: What symptoms may lead to a CV axle inspection?

A: Common reasons to inspect the axle include clicking while turning, vibration or shudder under acceleration, grease around a split boot, clunking during load changes, or measurable joint play. Other wheel-end or driveline parts can cause similar symptoms.

Q: Will replacing the CV axle automatically fix clicking or vibration?

A: Not necessarily. Clicking and vibration can also come from wheel bearings, tires, mounts, brakes, suspension joints, differential or transmission connections, and other driveline components. Diagnose the source before replacement.

Q: What should I compare before installation?

A: Compare the original and replacement shaft layout, inner and outer spline ends, boot positions, seal surfaces, retaining methods, hub connection, and required axle side. The assembly should seat without forcing the splines or damaging the boots.

Q: Are new axle nuts, bolts, seals, clips, or other service parts included?

A: Only the axle assembly or assemblies stated in the package are confirmed. Check the vehicle service procedure for one-time-use axle hardware, seals, clips, cotter pins, or related parts and obtain them separately when required.

Q: Should I replace both front CV axles at the same time?

A: Replace only the side or sides supported by inspection and the repair plan. A pair listing supplies both positions, but that does not prove both have failed; a single-axle listing does not include the opposite side.

CV Axle Buying Guide

Before purchasing a replacement CV Axle Shaft Assembly, confirm the key compatibility details below to ensure proper fitment.

1. Drivetrain Type

FWD – typically uses two front CV axles
AWD / 4WD – uses front and rear CV axles
RWD with independent rear suspension – may use rear CV axles

2. Left vs Right Axle Position

CV axles are usually sold by installation position:

Front Left (Driver Side)
Front Right (Passenger Side)

Left and right positions are determined from the driver’s seating position. Because the transmission is not centered, the two axles often have different lengths and joint designs and are not interchangeable.

3. Compatibility Details

ABS Tone Ring – required on certain vehicles for ABS sensors
Spline Count – must match the transmission and wheel hub
OE Part Number – the most reliable way to confirm compatibility

4. Estimated Installation Time & Tools

Professional mechanic: 1–1.5 hours
DIY installation: 3–5 hours

Floor jack and jack stands
Axle nut socket (30mm / 32mm / 36mm)
Breaker bar
Torque wrench
Ball joint separator or pickle fork

Ensure the vehicle is securely supported before starting installation.

Returns & Refunds

We accept returns within 30 days of delivery for eligible items. If the product is unused and in original condition, you may request a return according to our refund policy. Full policy details: View Refund Policy . We recommend contacting our support team before initiating a return to ensure the fastest resolution.

Customer Support

If you purchased the wrong part, received an incompatible item, or need installation assistance, please contact us directly.

Email: service@bdfhyk.com

Business Hours:

Mon–Fri 9:00–18:00 (GMT+8)

Mon–Fri 19:00–04:00 (UTC−6 / CST)

Manufacturing Standards

Direct Factory Supply, Cost Saving
Integrated R&D, production, and warehousing. Eliminate middleman markups: same quality at lower prices, superior quality at same prices.

Precision Inspection, Commitment to Excellence
Rigorous inspection process, international certification standards. Each product includes individual inspection.

Verified Fitment

Precision-matched to your specific model.

Factory Direct Price

Direct price with strict quality control.

30-Day Easy Returns

Risk-free shopping with hassle-free returns.

Installation Guides

Step-by-step help for a smooth setup.