2PCS Front Left & Right CV Axle Set for Acura TL 2004-2006 & Honda Accord 2003-2007 | Replace NCV36125 NCV36126

Acura TL & Honda Accord Front Left and Right CV Axle Set

This BDFHYK two-piece front CV axle shaft assembly set is an OE-style aftermarket replacement based on the original listing information for Acura TL 2004-2006 and Honda Accord 2003-2007 applications. It includes one front-left and one front-right axle assembly for customers purchasing both front positions together.

Clicking during turns, vibration under acceleration, grease around a damaged CV boot and clunking during load changes are common reasons to inspect an Acura TL CV axle or Honda Accord CV joint. Similar symptoms can also come from tires, wheel bearings, engine or transmission mounts, brakes, suspension parts and other driveline connections, so diagnose each side before replacement.

Acura TL and Honda Accord Front CV Axle Fitment

Verify the exact year, model, trim, engine, transmission and drivetrain before ordering. An Acura TL CV axle or Honda Accord CV axle can vary by configuration, and the left and right assemblies may use different shaft lengths, spline ends, joint housings, seal surfaces and retaining methods.

NCV36125, NCV36126 and OE Interchange References

Cross-check NCV36125, NCV36126, 44306SDAA01, 44306SDCA01, 44305SDAA00 and 44305SDCA00 against the removed axles, an OE catalog or a qualified parts lookup. Confirm each reference together with the correct left or right position and complete vehicle configuration.

When to Inspect an Acura TL or Honda Accord CV Joint

Inspect both front axles individually when an Acura TL CV axle or Honda Accord CV joint concern includes:

• Clicking or popping that becomes more noticeable while turning.
• Shudder or vibration under acceleration.
• Grease around either front wheel, control arm or splash shield.
• Clunking during acceleration and deceleration transitions.
• Cracked boots, loose clamps, measurable joint play or visible shaft damage.

An outer Honda Accord CV joint may click more clearly during turns, while an inner joint can contribute to acceleration-related vibration. These patterns are inspection clues and do not prove that both front axles require replacement.

What This Acura TL and Honda Accord CV Axle Pair Includes

The package contains two complete CV axle shaft assemblies: one front left and one front right. The original listing identifies protective CV joint boots, grease and retaining clamps as part of the assemblies.

Fitment Checks Before Honda Accord CV Joint Replacement

• Verify year, model, trim, engine, transmission and drivetrain.
• Confirm that the repair plan requires both front positions supplied in this set.
• Match NCV36125, NCV36126 or another listed interchange reference.
• Compare each axle by side, including shaft length and layout, inner and outer spline ends, boot positions, seal surfaces and retaining methods.
• Keep the left and right assemblies identified because they are position-specific.
• Review the vehicle service procedure for axle nuts, seals, clips, cotter pins or other one-time-use hardware that may be required separately.

Acura TL and Honda Accord Front Axle Installation Checkpoints

Follow vehicle-specific service information and support the vehicle correctly. Inspect both wheel hubs, transmission connections, seal areas and nearby suspension components while the original axles are removed. Do not force the splines or pull either assembly into place by the CV boots. Confirm full inner and outer engagement on both sides, tighten hardware to the applicable specification, and check for fluid leaks, boot contact, abnormal noise and vibration after installation.

Package Includes

• 1 front-left CV axle shaft assembly.
• 1 front-right CV axle shaft assembly.

Important: This is a two-piece OE-style aftermarket replacement set and is not represented as Genuine or Official OEM parts. Verify vehicle configuration, axle positions and interchange references before purchase.