BDFHYK 2PCS Front left and right CV axle shaft assembly for Subaru Impreza Legacy Outback replace NCV66002

Front left and right CV axle joint shaft replacement with protective CV boots for Subaru Impreza Legacy Outback

CV axle shaft assembly detail showing axle ends boots and clamps for Subaru Impreza Legacy Outback

BDFHYK axle/cv joint replacement product view for Subaru Impreza Legacy Outback NCV66002

CV axle joint fitment reference for Subaru Impreza Legacy Outback front left and right position

Replacement CV joint shaft assembly with rubber boots and metal axle ends

BDFHYK CV axle shaft assembly replace NCV66002 for Subaru Impreza Legacy Outback

2PCS Front Left + Right CV Axle Shaft Assembly for Subaru Impreza, Legacy & Outback | Replace NCV66002

$163.99

Product Detail

Type CV Joint (Constant Velocity Joint)
OE Number 28321AG00B, 28321AG00D, 28321AG01B, 28321FG000, 28321FG002, 28321FG003, 28321FJ000, NCV66002, 667355, 66-7355

Trust & Assurance

Free Shipping · 3–7 Business Days

12-Month Warranty

30-Day Return

Secured Payment

BDFHYK 2PCS Front CV Axle Shaft Assembly Set for Subaru Impreza, Legacy, and Outback

This BDFHYK 2PCS front CV Axle Shaft Assembly set is an OE-style aftermarket replacement for listed Subaru Impreza, Subaru Legacy, and Subaru Outback applications. It includes the front left and front right axle assemblies for vehicles where the original axle/cv joint has been diagnosed as worn, damaged, leaking grease, or causing driveline symptoms.

Vehicle Fitment

Make	Model	Year Range	Position
Subaru	Impreza	2008-2011	Front Left + Front Right
Subaru	Legacy	2005-2009	Front Left + Front Right
Subaru	Outback	2005-2009	Front Left + Front Right

OE and Interchange Numbers

Reference and interchange numbers include 28321AG00B, 28321AG00D, 28321AG01B, 28321FG000, 28321FG002, 28321FG003, 28321FJ000, NCV66002, 667355, and 66-7355. Always compare the OE or interchange number with your original axle before ordering.

Fitment Checks Before Ordering

Confirm year, make, model, trim, engine, drivetrain, and front axle position.
Confirm this set matches the front left and front right axle positions needed for your vehicle.
Compare spline count, compressed length, seal area, ABS configuration, and axle nut style when specifications are available.

Common Symptoms Related to a Worn CV Axle Joint

Clicking or popping while turning
Vibration during acceleration
Grease near the wheel or CV boot
Knocking or clunking under load
Torn, cracked, or leaking CV boot

Installation Checkpoints

Compare the old and new axle assemblies before installation.
Use vehicle-specific service information for axle nut torque and installation steps.
Inspect axle seals, wheel bearings, hubs, ball joints, control arms, and ABS-related components if symptoms remain.

Package Includes

1 x Front Left CV Axle Shaft Assembly
1 x Front Right CV Axle Shaft Assembly

Important Replacement Note

This is a BDFHYK OE-style aftermarket replacement part. It is not a Genuine OEM or Official OEM part. Fitment depends on the exact vehicle application, axle position, drivetrain, and OE/interchange number.

Technical Specifications

Brand	BDFHYK
Product Type	CV Axle Shaft Assembly
Product Configuration	2PCS Front Left + Front Right CV Axle Shaft Assembly
SKU	BDDLZ-BD-05-DS03-00025BK-001-W
Fitment	Subaru Impreza 2008-2011; Subaru Legacy 2005-2009; Subaru Outback 2005-2009
Vehicle Make	Subaru
Vehicle Model	Impreza; Legacy; Outback
Placement on Vehicle	Front Left + Front Right
Reference Number	NCV66002
OE / Interchange Number	28321AG00B; 28321AG00D; 28321AG01B; 28321FG000; 28321FG002; 28321FG003; 28321FJ000; NCV66002; 667355; 66-7355
Common Symptoms to Inspect	Clicking while turning; vibration during acceleration; grease near the wheel or CV boot; knocking under load; torn or leaking CV boot
Replacement Type	OE-style aftermarket replacement
Critical Note	This is an OE-style aftermarket replacement, not a Genuine OEM or Official OEM part. Confirm exact vehicle fitment before ordering.

Q: Will this CV axle shaft assembly set fit my Subaru Impreza, Legacy, or Outback?

A: This listing is for the vehicle applications shown on the page. Confirm year, make, model, trim, engine, drivetrain, front axle position, and OE/interchange number before ordering.

Q: Is this a pair or a single axle?

A: This listing includes front left and front right CV axle shaft assemblies. Check both parts against the original axles before installation.

Q: Does this replace NCV66002?

A: Yes. This listing references NCV66002 and related OE/interchange numbers. Compare the listed numbers with your original axle or parts reference before ordering.

Q: What symptoms may indicate a worn CV axle joint?

A: Common signs include clicking while turning, vibration during acceleration, grease near the wheel or CV boot, knocking under load, or a torn/leaking CV boot.

Q: Should I replace the CV boot or the complete axle?

A: If boot damage is fresh and the joint is still clean and quiet, boot service may be considered. If the joint is noisy, loose, contaminated, or vibrating, replacing the complete CV axle shaft assembly is often more practical.

Q: What should I compare before installation?

A: Compare side position, spline count, compressed length, seal area, ABS configuration, axle nut style, and OE/interchange number before installation.

CV Axle Buying Guide

Before purchasing a replacement CV Axle Shaft Assembly, confirm the key compatibility details below to ensure proper fitment.

1. Drivetrain Type

FWD – typically uses two front CV axles
AWD / 4WD – uses front and rear CV axles
RWD with independent rear suspension – may use rear CV axles

2. Left vs Right Axle Position

CV axles are usually sold by installation position:

Front Left (Driver Side)
Front Right (Passenger Side)

Left and right positions are determined from the driver’s seating position. Because the transmission is not centered, the two axles often have different lengths and joint designs and are not interchangeable.

3. Compatibility Details

ABS Tone Ring – required on certain vehicles for ABS sensors
Spline Count – must match the transmission and wheel hub
OE Part Number – the most reliable way to confirm compatibility

4. Estimated Installation Time & Tools

Professional mechanic: 1–1.5 hours
DIY installation: 3–5 hours

Floor jack and jack stands
Axle nut socket (30mm / 32mm / 36mm)
Breaker bar
Torque wrench
Ball joint separator or pickle fork

Ensure the vehicle is securely supported before starting installation.

Returns & Refunds

We accept returns within 30 days of delivery for eligible items. If the product is unused and in original condition, you may request a return according to our refund policy. Full policy details: View Refund Policy . We recommend contacting our support team before initiating a return to ensure the fastest resolution.

Customer Support

If you purchased the wrong part, received an incompatible item, or need installation assistance, please contact us directly.

Email: service@bdfhyk.com

Business Hours:

Mon–Fri 9:00–18:00 (GMT+8)

Mon–Fri 19:00–04:00 (UTC−6 / CST)

Manufacturing Standards

Direct Factory Supply, Cost Saving
Integrated R&D, production, and warehousing. Eliminate middleman markups: same quality at lower prices, superior quality at same prices.

Precision Inspection, Commitment to Excellence
Rigorous inspection process, international certification standards. Each product includes individual inspection.

Verified Fitment

Precision-matched to your specific model.

Factory Direct Price

Direct price with strict quality control.

30-Day Easy Returns

Risk-free shopping with hassle-free returns.

Installation Guides

Step-by-step help for a smooth setup.