BDFHYK Front Right CV axle shaft assembly for Honda CR-V replace NCV36575

Front Right CV axle joint shaft replacement with protective CV boots for Honda CR-V

CV axle shaft assembly detail showing axle ends boots and clamps for Honda CR-V

BDFHYK axle/cv joint replacement product view for Honda CR-V NCV36575

CV axle joint fitment reference for Honda CR-V Front Right position

Replacement CV joint shaft assembly with rubber boots and metal axle ends

BDFHYK CV axle shaft assembly replace NCV36575 for Honda CR-V

Front Right CV Axle Shaft Assembly for Honda CR-V 2007-2011 | Replace NCV36575

$88.99

Product Detail

Type CV Joint (Constant Velocity Joint)
OE Number 44305SWA900, 44305SWA901, 44305SXSA11, 44305T0AA00, 44305T0AA01, 66-4257, 664257

Trust & Assurance

Free Shipping · 3–7 Business Days

12-Month Warranty

30-Day Return

Secured Payment

BDFHYK Front Right CV Axle Shaft Assembly

This BDFHYK CV Axle Shaft Assembly is designed as an OE-style aftermarket replacement for listed Honda CR-V applications. It is a practical axle/cv joint replacement option when the original cv joint shaft is worn, damaged, leaking grease, or causing symptoms such as clicking while turning or vibration during acceleration.

Vehicle Fitment

Make	Model	Year Range	Position
Honda	CR-V	2007-2011	Front Right

Replaces / Interchange Part Numbers

44305SWA900, 44305SWA901, 44305SXSA11, 44305T0AA00, 44305T0AA01, 66-4257, 664257. Always compare the OE or interchange number with your original axle before ordering.

Fitment Notes

Confirm year, make, model, trim, engine, drivetrain, and front right axle position before ordering.
This listing is for the Front Right position. CV axles are position-specific and may not interchange with the left side.
Compare spline count, compressed length, seal area, ABS tone ring configuration, and axle nut style when available.

Common Replacement Symptoms

Clicking or popping noise while turning
Vibration during acceleration or cruising
Grease around the inside of the wheel or near the CV boot
Knocking or clunking under load
Torn, cracked, or leaking CV boot

Installation Checkpoints

Compare the old and new CV axles before installation.
Use vehicle-specific service information for axle nut torque.
Inspect axle seals, wheel bearings, ball joints, control arms, hubs, and ABS-related components if symptoms remain.

Package Includes

1 x Front Right CV Axle Shaft Assembly

Technical Specifications

Brand	BDFHYK
Product Type	CV Axle Shaft Assembly
Replacement Type	OE-style aftermarket replacement
Vehicle Fitment	Honda CR-V 2007-2011
Position	Front
Side	Front Right
OE / Interchange Number	44305SWA900, 44305SWA901, 44305SXSA11, 44305T0AA00, 44305T0AA01, 66-4257, 664257
Reference Number	NCV36575
Drive Type	Verify vehicle drivetrain before ordering
Critical Note	Fitment depends on year, make, model, trim, engine, drivetrain, axle position, side, and OE/interchange number.

Q: Will this CV axle shaft assembly fit my vehicle?

A: This product is listed for the vehicle applications shown on the page. Confirm year, make, model, trim, engine, drivetrain, axle position, and OE/interchange number before ordering.

Q: Which position does this CV axle fit?

A: Check the Position and Side shown in the product title, fitment table, and specifications. CV axles are position-specific and may not interchange with the opposite side.

Q: What symptoms may indicate a bad CV axle joint?

A: Common signs include clicking while turning, vibration during acceleration, knocking under load, grease near the wheel, or a torn CV boot.

Q: Should I replace the CV boot or the complete axle?

A: If boot damage is fresh and the joint is still clean and quiet, boot service may be considered. If the joint is noisy, loose, contaminated, or vibrating, replacing the complete CV axle shaft assembly is often more practical.

Q: Does spline count or compressed length matter?

A: Yes. A similar-looking axle may not fit if the spline count, compressed length, seal diameter, ABS configuration, or axle nut style is different from the original part.

Q: Can I install this CV axle myself?

A: Experienced DIY users may be able to install it with proper tools and service information. Professional installation is recommended if you are not familiar with axle nut torque, axle seals, or ABS-related components.

CV Axle Buying Guide

Before purchasing a replacement CV Axle Shaft Assembly, confirm the key compatibility details below to ensure proper fitment.

1. Drivetrain Type

FWD – typically uses two front CV axles
AWD / 4WD – uses front and rear CV axles
RWD with independent rear suspension – may use rear CV axles

2. Left vs Right Axle Position

CV axles are usually sold by installation position:

Front Left (Driver Side)
Front Right (Passenger Side)

Left and right positions are determined from the driver’s seating position. Because the transmission is not centered, the two axles often have different lengths and joint designs and are not interchangeable.

3. Compatibility Details

ABS Tone Ring – required on certain vehicles for ABS sensors
Spline Count – must match the transmission and wheel hub
OE Part Number – the most reliable way to confirm compatibility

4. Estimated Installation Time & Tools

Professional mechanic: 1–1.5 hours
DIY installation: 3–5 hours

Floor jack and jack stands
Axle nut socket (30mm / 32mm / 36mm)
Breaker bar
Torque wrench
Ball joint separator or pickle fork

Ensure the vehicle is securely supported before starting installation.

Returns & Refunds

We accept returns within 30 days of delivery for eligible items. If the product is unused and in original condition, you may request a return according to our refund policy. Full policy details: View Refund Policy . We recommend contacting our support team before initiating a return to ensure the fastest resolution.

Customer Support

If you purchased the wrong part, received an incompatible item, or need installation assistance, please contact us directly.

Email: service@bdfhyk.com

Business Hours:

Mon–Fri 9:00–18:00 (GMT+8)

Mon–Fri 19:00–04:00 (UTC−6 / CST)

Manufacturing Standards

Direct Factory Supply, Cost Saving
Integrated R&D, production, and warehousing. Eliminate middleman markups: same quality at lower prices, superior quality at same prices.

Precision Inspection, Commitment to Excellence
Rigorous inspection process, international certification standards. Each product includes individual inspection.

Verified Fitment

Precision-matched to your specific model.

Factory Direct Price

Direct price with strict quality control.

30-Day Easy Returns

Risk-free shopping with hassle-free returns.

Installation Guides

Step-by-step help for a smooth setup.